Recommended Hitch for a 2024 Cadillac XT4

Question

Question:

I have a 2024 Cadillac XT4 and I would like to add a 2" hitch to it. Is this something you have available?

asked by: Kim P

0

Expert Reply:

Yes, it is! To add a 2" hitch to your 2024 Cadillac XT4, I recommend the Curt Trailer Hitch item # C39FR. This hitch is custom fit and bolts to your Caddy with included hardware. I really like this hitch because it installs behind your rear bumper cover and can be completely hidden when you are not towing.

I have attached a couple of pictures below along with an installation video so you can see what this hitch looks like once installed.

If you are planning on towing you will also need a wiring harness item # C44FR if you have the tow package or item # 119250KIT if you do not have the tow package and a ball mount kit item # C45534.

I also recommend using the No-Drill Mount Bracket item # 18136 and the item # C42CR to secure the 4-way connector to your hitch. This will put it in an easy to reach spot and prevent the risk of it falling onto the road.

expert reply by: Jerred H

0

2024 Cadillac XT4
(click to enlarge)

Answer 1

First you need the base plate kit which you have already picked out part #RM-523162-4 which is a confirmed fit for your 2014 Cadillac SRX without cruise control. In addition to the base plates, you will also need a compatible tow bar, safety cables,…

view full answer...

Answer 2

Yes, the Curt Hitch item #C39FR will be concealed by the rear panel when you are not using the hitch on your 2023 Cadillac XT4. This hitch is custom fit and bolts directly to your XT4 with included hardware. I have attached an installation video and…

view full answer...

Answer 3

To install a 7-Way harness on your 2024 Cadillac XT4 you will need two separate wiring harnesses because they don't make just one that'll do the job. The first harness you'll need is the Curt T-Connector Vehicle Wiring Harness item…

view full answer...

Answer 4

I pulled up the owners manual of your 2014 Cadillac SRX online and found that on page 10-84 it can be flat towed. This includes front wheel drive and all wheel drive models. You can then use the base plate kit you referenced #RM-523162-4. In addition…

view full answer...

Answer 5

Yes, there is a hitch for your 2024 Cadillac XT4. The best one is going to be the Curt Hitch item #C39FR. This hitch is custom fit and bolts to your Cadillac with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 6

The Curt trailer hitch for your 2019 Cadillac XT4, part #C39FR, actually installs on the same existing studs and with the same hardware that the factory bumper beam uses. During the installation the bumper beam is removed and the hitch fits over the…

view full answer...

Answer 7

Congrats on the new vehicle! The best hitch for a 2024 Cadillac XT4 is the Curt item #C39FR. This hitch is custom fit and bolts to your Cadillac with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing…

view full answer...

Answer 8

There are a few troubleshooting steps to help you figure out why you have no power. I would start by making sure that there is not any corrosion or debris blocking your connection points. If they are clean or still no power after cleaning, I would…

view full answer...

Answer 9

Yes, the Curt Trailer Hitch Receiver #C39FR is confirmed to fit all models of the 2022 Cadillac XT4. This hitch is made in the USA, has a bolt-on, no-drill installation and will provide you with a 2" hitch receiver which is the most common size…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...