What is the Capacity of Curt Trailer Hitch 11132 for a 2007 Chrysler PT Cruiser

Question

Question:

whats the system rating for this hitch?

asked by: Angela S

0

Expert Reply:

I am not sure what you mean by system rating but the Curt trailer hitch # C11132 is rated for 200 pounds tongue weight and 2,000 pounds gross trailer weight. I have included a link to the installation instructions for you to view. Be sure to consult the vehicle owners manual for its towing capacities. Always go by the lower rating. The hitch meets Regulation V-5 and SAE J684 regulations.

If you plan on towing with this hitch the correct ball mount to use is # C45520 with pin and clip # PC2. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. For trailer wiring you can use # C55532. I have included a link to a video that shows how the wiring installs.

If you will be using the hitch with a bike rack or cargo carrier then Curt specifies that you also have to use stabilization strap # 18050 for their warranty requirements. The strap reduces some of the stress on the trailer hitch.

expert reply by: Michael H

0

Answer 1

The trailer wiring is not included with a trailer hitch for your 2004 PT Cruiser. We do offer them separately. There is no drilling required for the installation of the Curt Trailer Hitch, part #C11132. This is a Class l hitch and it has a 1-1/4 inch…

view full answer...

Answer 2

Depending on the size of the engine on the wave runner, a single wave runner and trailer can weigh between 700 and 1000 lbs. Although the Curt Class I receiver you mentioned has a 2000 lb towing/ 200 lb tongue weight capacity, you still must abide by…

view full answer...

Answer 3

Get the Curt Trailer Hitch Receiver #C11132 for your 2009 Chrysler PT Cruiser as it comes with all the hardware you need to install with no welding needed. You'll need a ball mount #C45520 and a hitch ball. Either 1-7/8 inch #C40001 or a 2 inch…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 7

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 12

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

What is the Capacity of Curt Trailer Hitch 11132 for a 2007 Chrysler PT Cruiser

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching