Wiring of Bright Way Push Test Trailer Breakaway Kit
Question:
I have the 3802346 breakaway switch. I wired per the diagram on the cover. It does not operate. The diagram shows only six wires, omitting the blue wire. The diagram indicates the red wire is the battery, and the black is for the brakes. Looking at the wiring at the axles I see white and blue wires making the appropriate connections. If I understand correctly there seems to be no standard for the functions of the wires for different trailers why?. If that is the case, can I assume the blue not the black is for the brakes, and if so, which is the battery connection black or red and what does the remaining wire do? FYI- the remaining wires function as indicated, white for the ground, green, yellow, and brown for the trailer lights.
asked by: Brian D
Expert Reply:
The 7th circuit that is omitted on the wiring diagram of the Brightway Breakaway Kit part # 3802346 is an aux circuit that is most commonly a reverse light circuit if it's used at all. The rest of the colors are standard function but if your colors are different you would need to wire by function instead. The actual taillight functions bypass the charge altogether so you would not need to worry about them with this box.
The red wire is the 12 volt aux circuit which sometimes can be black, blue is brake output that runs to brake, and white is ground. These functions cannot be mixed up.
Product Page this Question was Asked From
Bright Way Push-to-Test Trailer Breakaway Kit with 1-Amp Charger and 5 Ah Battery - Side Load
- Trailer Breakaway Kit
- Kit with Charger
- Side Load
- Single-axle
- Tandem-axle
- LED Tester
- 1 Amp Charger
- Battery Included
- 5 Ah
- Bright Way
more information >
Continue Researching
- Search Results: break away kit
- Shop: Bright Way Push-to-Test Trailer Breakaway Kit with 1-Amp Charger and 5 Ah Battery - Side Load
- Q&A: Wiring Diagrams for Installing Bright Way Trailer Breakaway ICU Kit # BW94FR
- Shop: Camco RV Vinyl Trim Insert - Black - 100' Long x 1" Wide
- Q&A: Where Does Blue Wire Connect for Bright Way Push-to-Test Trailer Breakaway Kit
- Shop: Replacement Trailer Hub Bearing - L68149
- Shop: Replacement Shoe and Lining Kit for Manual Adjusting 10" Electric Brake Assembly - 3,500 lbs
- Video: Bright Way Push-to-Test Trailer Breakaway Kit Review and Installation 3802308
- Shop: Bright Way Push-to-Test ICU Trailer Breakaway Kit with 0.5-Amp Charger and 5 Ah Battery - Side Load
- Shop: Trailer Wiring Junction Box - 7 Color Coded Terminals - ABS
- Q&A: Does Blue Wire of Bright Way Push-to-Test ICU Trailer Breakaway Kit go to Battery Inside Box
- Q&A: Breakaway Switch is Not Working After Pulling Pin
- Article: Trailer Wiring Diagrams
- Shop: Curt Echo Wireless Brake Controller - 7-Way Plug Mount w/ Bluetooth App - 1 to 2 Axle - Proportional
- Shop: Brake Controller
- Video: etrailer Trailer Brakes AKBRKR-S-10 Review
- Video: Review of Bright Way Trailer Breakaway Kit - Kit with Charger - 3802346
- Video: Review of Demco A-Frame Trailer Coupler - 50-Degree A-Frame Bolt-On Trailer Coupler - DM13205-95
- Search Results: 8~247
- Search Results: brake shoe
- Search Results: battery
- Search Results: dexter 10 drum
- Search Results: k71~047~00
- Q&A: Does the Power Wire for a Brake Controller Need to Be Ran Directly to the Battery
- Q&A: Can Bright Way Trailer Breakaway Kit be Wired to Trailer Battery?
- Q&A: Is The 12 Volt Supply Line Required When Installing The Wiring Kit For a Trailer Brake Controller?
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Search Results: lm48548
- Shop: Trailer Wiring
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)