Which Shackle Kit Will Work w/ a 2003 Komfort 28T Trailer?

Question

Question:

Hi, How do I know which morryde shackle kit will work with my 2003 Komfort 28T. I don’t see my trailer in the down. Thank you

asked by: Rob

0

Expert Reply:

You will need to measure the shackles on your 2003 Komfort trailer. If you have 2-1/4" long shackles you will want the MORryde Suspension Upgrade Kit item # MR46ZR. For 3-1/8" long shackle straps item # MR76ZR.

expert reply by: Jerred H

0

Answer 1

From the measurements you provided, the Lippert Road Armor #LC696740 is going to be the better option. You will also need the #LC64FR to complete it. This will include wet bolts and all shackles, but they will be a little shorter at 3 1/8 inches.

view full answer...

Answer 2

It's not uncommon for a trailer with a 29-1/2 inch axle spacing to use either 7-3/4 inch or 5-3/4 inch (or similar) equalizers but the shorter ones are more commonly used with the 25-1/4 inch leaf springs, like the ones you have, designed for up…

view full answer...

Answer 3

Yes the MORryde Suspension Upgrade Kit for Tandem Axle Trailers #MR58ZR will work with your Equaflex system as it provides you with the same 2-1/4 inch long shackles as well as all of the other standard components needed that would match what you…

view full answer...

Answer 4

When changing the size of the equalizer that is on a trailer, this will affect the size of hangers needed or the spacing of the hangers. For example, if you were to go with an equalizer that is one inch taller, you could keep the center hanger the…

view full answer...

Answer 5

What is the difference in measurements? If your current equalizer is a little shorter in side to side length for the CRE3000 part #MR27ZR you would want to go with the longer shackle kit part #MR76ZR which is 3-1/8 inch.

view full answer...

Answer 6

Thank you for all of the info you listed and the pictures. Based on that the MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR is the correct fit. Your trailer does not have the Correct Track setup on it. There would be a height difference…

view full answer...

Answer 7

While I can't for sure promise that the Suspension Shackle Kit part #MR46ZR fits your Arctic Fox I would be willing to bet a large amount of money that it would since you have the standard 1-3/4 inch wide springs which are basically always 9/16…

view full answer...

Answer 8

The best base plate kit for your 2009 Sierra 1500 is going to be the Roadmaster Direct-Connect Base Plate Kit item #3154-3. This kit is custom fit and built specifically for the Sierra 1500's. The removable arms will keep your front end as close…

view full answer...

Answer 9

The MORryde SRE4000 kits like the #MR47ZR and the #MR97ZR typically will lift the trailer suspension about 3/4 to 1 inch. It varies for most people as we have found but I looked online and most people reported between 3/4 inch and 1 inch.

view full answer...

Answer 10

Yes, there are clamp on roof rack options for your 2015 Jeep Renegade Sport. Since you do not have the factory installed roof rails, I recommend the roof rack by Rhino-Rack and it includes the following parts: Rhino-Rack Vortex Aero Crossbars -…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Well shackle length is mainly based on the height difference between the front and rear hangers. The rear hanger normally doesn't hang as low as the front so that the shackle can offset the difference and add the ability to move. What is the…

view full answer...