JR Products gas shock replaces 1 worn or damaged shock on your RV entry door or storage doors. Durable black-nitride finished gas shock measures 11.41" compressed, 20" extended, and has 60 lbs of force.
Features:
Specs:
When replacing gas shock on your vehicle or RV, you will want to make sure you are buying a replacement with the exact same extended length, compressed length, and pounds of force. This information is usually printed on the shock. Lengths are measured from the center of the ball joint used for mounting. If you are planning on installing gas shocks on something for the first time, identifying the shock you need requires fairly complex initial calculations, so be sure to do your research to avoid purchasing a shock that will not fit your application.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the JR Products 20" long gas shock. This gas shock is designed to replace a worn or damaged shock on your RV entry door or storage doors. The extended length on this is 20", and that measurement is from the center of this ball socket to the center of this one. If we put a tape measure on that, there's your 20" length. The compressed length on this would be 11.41". Output force on this shock is 60 pounds.
The connection type is a retaining clip on a 10 millimeter ball socket.I just want to zoom in to show you how you would install this; it's pretty simple installation. If you look, here's your 10 millimeter ball socket right here, and if you turn it over on top, there's this retaining ring. What you'll do is take a flat tip screwdriver, insert it underneath that retaining ring, pry it open, and that'll release the pressure on that. Then you can put this onto your 10 millimeter ball, and then once it's on the ball, push that retaining clip down and it'll secure it in place, so it's very simple installation. This also is in a nice, black nitride finish.
That should do it for the review on the JR Products 20" long gas shock..
Average Customer Rating: 4.7 out of 5 stars (310 Customer Reviews)
JR Products gas shock replaces 1 worn or damaged shock on your RV entry door or storage doors. Durable black-nitride finished gas shock measures 11.41" compressed, 20" extended, and has 60 lbs of force.Product was very easy to install and the ordering process was fast and easy. It came right on time.
Wonderful service and QUICK standard sh ipping.
Product worked well; application simple.
Replaced out outdoor kitchen door and added theses to the setup and they worked great.
I found the part I needed on their easy to use web site. Ordering was pain free. I received confirmation emails. I received tracking information that was realistic. Overall excellent work and experience.
Door shocks have great strength, I expected to replace both on my belly bay door. One was strong enough!
Super fast shipping
Replaced all 4 on 2000 Maxum 3300 scr.
Perfect fit
Just what I was looking for!
The selection process was easy to follow. I needed gas struts with a greater lift capacity for our under bed storage due to the addition of a memory foam mattress. I was able to select a strut pair with the proper length and extension from the website. The struts were received quickly and were exactly what I needed. The bed now raises gently and remains elevated.
When my package arrived it was beat up and one of the clips on the end of the shock was missing,not what I would give a good report !!
This strut did not fit precisely due to the thickness of the end connectors. They are thicker than the original strut and since the strut has to fit between the bottom of the door and the threshold in the closed position it would not allow the door to close. I found that by exchanging the end connectors with the original strut I was able to install the strut and close the door. The only problem with this solution is that the new strut with the old connectors is slightly longer than the old strut/connector assembly and now allows the door to open slightly farther than before. Our awning arm just barely clears the door when opening and closing so will have to be very careful from now on when extending and retracting the awning. Our motorhome is a Sunseeker 3010ds model in case this is helpful to others ordering this product.
Item was exactly as advertised, easy installation, fits perfectly on our RV door. Our previous gas shock was worn out & would not hold the door open. This product is sturdy & stable. It fixed the issue.
Exactly what I needed for my Kwik Kamp motorcycle trailer! It's nice to share information in our group when we find parts to use for our discontinued campers.
Product is installed but instructions were a bit vague and difficult to implement(related to the removal of previous gas shock bar).
Thanks, now my tool box won't cut my arm off.
Very fast delivery! I've ordered from e-trailer several times and service has always been great!
The Stabilus shock holding the 22" door of our bumper pull trailer open was weak. Mild wind would push it shut. This shock fit right onto the existing ball joints. A small blade screwdriver pried the "c" clip back, allowing me to slip the socket over the ball, and the clip snapped into place. Maybe 30 seconds and the shock was installed.
The biggest challenge was determining what force I needed in the replacement. The existing shock had the model information scraped away where it rubbed on the door threshold. No where could I find on the etrailer site what force a small door shock should be. I ended up chatting with an RV service tech I know, who looked it up in his parts catalog. Turns out 10 lb force is standard except for large RV doors. I would suggest etrailer.com add this information on their online catalog. Maybe it's there and I couldn’t' find it? "Gas shock force needed for RV doors."
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.