Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This kit has everything you need to replace or install a roof vent, side-mount vent, plumbing stack, or refrigerator vent on an RV with a rubber roof or sidewall. Includes white butyl tape, mounting screws, and instructions.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to review part number CAM25013. This is the Camco RV vent insulation kit for rubber roofs or sidewalls. This kit has everything you need to replace or install a vent on your RV's rubber roof or sidewall. It is designed to work for roof vents, side mount vents, plumbing stacks and refrigerator vents. It does include all the items shown here. It includes this 8 foot roll of butyl tape, which is 1 inch wide, and as you can see, the butyl tape is like acaulking compound. Basically this type of tape, this white butyl tape will adhere to rubber surfaces. It also comes with the screws pictured here, the 24 number 8 by 1 inch slotted hex screws, and the 4 number 6 by 1/2 inch Phillips screws. This kitdoes come with a one year limited warranty. And that should do it for the review on part number CAM25013, the Camco RV vent insulation kit for rubber roofs or sidewalls.
.
Average Customer Rating: 4.7 out of 5 stars (138 Customer Reviews)
This kit has everything you need to replace or install a roof vent, side-mount vent, plumbing stack, or refrigerator vent on an RV with a rubber roof or sidewall. Includes white butyl tape, mounting screws, and instructions.
I used this to install my new range vent and my shore line door. It worked very well and was enough to do both. The sealing tape is still holding up and the painted screws still are good and white and has not chipped as of yet.
Another good etrailer part
The best part of the Maxxair MaxxFan Plus Roof Vent w/ 12V Fan and Thermostat Manual Lift 10 Speed was installing it myself. I had climbed to my van to it's perfect white metal roof. Run an extension cord. Plugged in the [hardware brand] jigsaw. Bzzzzz. Four inches of sliced virgin metal. Four inches of hole across the roof. An existential moment. No going back. No trial run. Only forward. Forward like the Merry Prankster's bus.
Only later did I realize the point of no return had long since past. It past when I drilled the pilot holes before making the crooked ragged jigsaw cuts.
Installation was empowering. It took me out of my comfort zone. Cutting a ragged hole in the roof changed the way I think about cars. And it all worked out. Installation was as straight forward as people say it is. The hardest part was my mental resistance to cutting the roof.
The vent doesn't leak. It moves air. It's quiet and does not draw much power. I love that it is reversible. At night, I set it to exhaust so light seeking moths don't die in the spinning blades. They are blown away instead of sucked in.
For the electrical. I fused both positive and negative off the battery. I ran the power wires through flex automotive conduit. I picked up the fusing, wire and flex conduit from my local Walmart after figuring out what I needed. The hard part of that was determining wire gauge based on the total length of the feeds. The length was longer than I would have guessed when I measured it.
And it all worked the first time I pushed the button. Great product. Great experience.
Worked great during installation of topper for our slide out on the camper. No issues noted to date and no leaks from screws being installed. Great product and assistance from Etrailer service.
Good product
Stephen
4/28/2023
Very good product. Used it in several applications and have not had any problems.
Worked as advertised. Relatively easy installation and good fit. Seems well built - much better than the fan we replaced! We have a 2005 34' Holiday Rambler RV and our old fan had essentially disintegrated. We just wanted a no nonsense manual fan that could work with or without the roof vent open (didn't need another remote!). Probably not 100% required to get the Butyl Tape kit if you use sealant of another type but highly recommended to ensure a tight seal and avoid leaks in the future.
Worked beautifully - pressed right in and conformed to the corrugations on my siding - great seal! I had removed all four vertical corner aluminum moldings on my TT; cleaned the siding; cleaned the molding/repainted. Re-installed with this new putty tape. Trimmed excess putty with Bondo plastic blade and the result was a professional finish. A year later the putty has not shifted or dried out (which was why I replaced in the first place). I dry camp in the hot Southwest a lot - so not having the putty dry out is paramount.
I've ordered several times from etrailer.com and always been happy. First, it's good not to feed the [on-line retailer] beast. Second, etrailer.com's website always has good solutions rather than my local trailer supply store which can be expensive on certain things. I found a bearing kit on etrailer.com that is a great value and perfectly matched my old bearings. I got my local brake shop to press the new bearing races into the hubs and I saved over $300 by doing it myself with the help of etrailer.com.
Good quality and includes screws. Butyl tape arrived fresh and flexible and not dried out and hard as can happen with this product.
Carlos
5/18/2017
Its butyl tape.... still providing a great seal and does not appear to have hardened
Very happy with installation kit, This makes installing the vent in my trailer very easy.
It did the job for my camper vent install but the width was inconsistent. I ended up doing 2 side by side strips along the vent flange to ensure good coverage. In some place the width of this tape was so thin it didn’t cover the entire flange.
Would purchase again,
The vent cover and the bathroom roof vent screen replacements were an exact replacement for my Arctic Fox. The putty tape was great. I couldnt be happier.
Used this to hopefully stop and leaks on the awning rail.
William
1/13/2019
It worked great but have since traded the trailer on something else
William
1/14/2019
They worked fine but since then we traded that trailer in for something else. Thanks for asking Have a Great Day
Picked up a used camper last October. I knew the old vent lid had duct tape on the hinge, and it gave out last trip. Ordered this one last week, got it today and was able to pull the old fan and drop this one in in around 45 minutes. The old vent was only held on with some butyl tape and dicor it appears.
I did a quick test to see that the fan ran, but I haven't finished up the trim yet. I think I need to trim the skirt that comes with it, but first impressions are that it's a nice upgrade from the old vent.
Items arrived fast with regular ground shipping. The roof vent was a perfect fit and installed as expectd. The price was awesome; it was half the price as the vent at my local RV dealer. etrailer.com wil be my go to for all my replacement parts.
Excactly what I needed to replace the old vents in my trailer. The Free shipping is great.. It really makes a difference with whom I bought from. I spoke with a person on the phone before I ordered my products just to make sure it was everything I needed. she was courteous and thorough..It was her who suggested these butyl tape kits.. good job ! I will definitely be buying from etrailer again.
I received the product in a timely manner in great condition. The fan installed exactly how it was described it worked exactly how I hoped etrailer is a great company to do business with they have great customer service, provide you with installation instructions and videos., and very reasonable prices I couldn’t ask for more .
This was what needed. I live in a manufactured home I looked all over for this vent not even the builder of my home could help me. Thank you etrailer. You should let manufactured home owners know of your replacement Parts. Thanks Again tom michaels.
This worked well with my fan install on the rubber roof of the 5th wheel. Simple and necessary.
Still providing a seal to my slide topper bracket after one year, no discoloration noted..
Worked great for the installation of the Mac air fan.
Bob
6/3/2019
Still keeping the water out.
Worked great on my slide out awning install. Just the right amount.
Good product at a good price. Easy to install. The box was damaged and the interior shroud was cracked. I was able to trim the damaged section off as it turned out to be excess to the installation process
After watching installation video, the job went without a hitch.
The product was what I had ordered. It was installed and works great. One thing that could be improved on is that I was short 5 screws so had to use some of the existing screws. It wasn't a big deal, I found 5 screws that were not rusted and had good tool well. I was impressed by the speed my product was shipped and delivered.
Thanks!
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Arthur
7/14/2019
Still going strong and no issues. Have made numerous trips camping for as long as 17 days on one trip and still no issues. Great products and expert assistance when needed by etrailer.