Does MORryde SRE4000 Kits for Trailer Lift Trailer Suspension

Question

Question:

In answers to questions one tech stated that MR47ZR or MR 97ZR wont increase height by 2 and another tech stated that neither will increase height by 2. Which is correct? I can use at least 2 inches to help level 5th wheel while improving suspension parts.

asked by: Marc G

0

Expert Reply:

The MORryde SRE4000 kits like the # MR47ZR and the # MR97ZR typically will lift the trailer suspension about 3/4 to 1 inch. It varies for most people as we have found but I looked online and most people reported between 3/4 inch and 1 inch.

expert reply by: Jameson C

0

Answer 1

I can help you figure out how to determine the best option for a wet bolt/shackle upgrade kit, though in order to determine the correct one you will need to take a quick measurement of the shackle straps on your Jayco Jay Flight. The reason for…

view full answer...

Answer 2

Thanks for the pictures! If you're getting that loud of noise out of your 2019 Jayco Eagle Fifth Wheel's equalizers then it is time to replace them. Greasing them won't fix that loud clunking noise. If your axles are…

view full answer...

Answer 3

I reached out to MORryde and the MORryde Rubber Equalizers for Tandem Axle Trailers - 35" Wheelbase - 8K #MR27ZR you were looking at is designed for 35" axle spacing and would not work with your trailer with 36" axle spacing. My…

view full answer...

Answer 4

The MORryde Suspension Upgrade Kit #MR76ZR has shackle's with a bolt hole center of 3-1/8" measured from hole center to hole center. I recommend the LubriMatic LMX Industrial Strength Grease #L11390 for the wet bolts. This grease is will…

view full answer...

Answer 5

You will measure the MORryde Suspension Upgrade Kit for Tandem Axle Trailers #MR76ZR from the center of each hole on the shackle strap.

view full answer...

Answer 6

Thanks for that info on your shackle strap length, and the best option for an upgrade kit for shackle straps that measure 2-1/2 inches long from center to center bolt hole is the kit with 2-1/4 inch shackle straps: - MORryde Suspension Upgrade Kit…

view full answer...

Answer 7

I spoke with my contact at Lippert who said that the Center Point Air-Ride Suspension Upgrade #LC1565391 that you referenced comes as one kit and isn't pieced out like you are asking. If you are needing to replace something on it, unfortunately…

view full answer...

Answer 8

The SRE4000 is quite a big improvement over the CRE3000. The SRE4000 provides more suspension travel (4" Vs. 3"), greater road shock absorption, a longer warranty (3 Yrs. Vs. 2 Yrs.), and much more. We also offer the SRE4000 with an…

view full answer...

Answer 9

Since your axles are rated for 6,000 lbs. you will want to use 6,000 lb. leaf springs. We have a few options for 6,000 lbs., the correct one will depend on the length of your current springs (measured eye to eye). I have included those options below.…

view full answer...

Answer 10

The best suspension upgrade for a Grand Design Reflection is the MORryde Premium Rubber Suspension Kit, part #MR97ZR for 33" wheelbase or part #MR47ZR for 35" wheelbase. This is a kit that comes with cushioned equalizers for shock…

view full answer...

Answer 11

I reached out to my contact at MORryde and she confirmed that while the MORryde Rubber Suspension Upgrade for Tandem Axle Trailers - 35" Wheelbase - 5.2K to 7K #MR47ZR you were looking at mentions 5200-7000lb axles, it will work with axles as…

view full answer...

Answer 12

The Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter #RP85FR and similar Goose Box pin box replacements will not allow you to make 90 degree turn without contact with your truck. Most trailers will be too wide for a 90 degree turn to…

view full answer...

Does MORryde SRE4000 Kits for Trailer Lift Trailer Suspension

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching