bing tracking image
Q & A Icon

Verifying Replacement Trailer Hub/Drum For a Pop Up Trailer With 3,500LB Axle and 10" Brakes  

Question:

Hello - Im looking to get something like this for my pop-up trailer Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased Item # AKHD-545-35-EZ-K but Im having a hard time figuring out the exact one I need. The owners manual says it could be one of 4 possible models. Ive narrowed it down to two. Its a AL-KO, 10 drum, 2.5 deep. Is there anything else I need to measure to confirm Im getting the right one. Or a model number I should look for on the existing hub/drum?

0

Expert Reply:

The best way to verify if the Easy Grease Trailer Hub and Drum Assembly # AKHD-545-35-EZ-K is the correct one for your pop up trailer is by removing one of the current hubs. This will allow you to verify what size bearings and grease seal are used. This hub includes a Inner Bearing # L68149(1.378" ID), Outer Bearing # L44649 and Grease Seal # 58846(1.719" ID). See the image below for the locations of the numbers on the different parts as well as where to measure in the event you do not see the part numbers.

Let me know if you find any different part numbers or dimensions on your spindle.

expert reply by:
0
Bud M
Spindle Measurement Points
Spindle Measurement Points
(click to enlarge)

Products Referenced in This Question




Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>