How Deep Are the Wheel Lock Nuts in Wheel Lock Set # RG01-150

Question

Question:

How deep are these wheel lock lugs?

asked by: John T

0

Expert Reply:

I went out to the warehouse and pulled wheel lock set # RG01-150. The overall internal depth of the nuts that thread onto the wheel studs is 1-1/4 inches including the threaded part. The threads make up 3/4 of an inch of that 1-1/4 inch overall depth.

expert reply by: Michael H

0

Answer 1

The Wheel Lock Set for 1/2" Wheel Bolts (2 Locks, 1 Key) #RG01-150 are the traditional 1/2-20. The actual depth of the locking nut is 1-1/4 inches.

view full answer...

Answer 2

The Redline Wheel Lock Set #RG01-150 are not coded like a door lock is. Essentially, these are unique lug nuts used to make it more difficult for a would-be thief to steal because most people are not going to be carrying around the special socket to…

view full answer...

Answer 3

The trailer wheel #AM22323HWTB that you referenced does not come with a valve stem. You'd need to order one separately with one like the part #AM20903. Then for a chrome center cap you'd want the part #319EZ and for lug nuts the part #LHLR103…

view full answer...

Answer 4

For your personal water craft trailer, it is highly likely that your wheel studs are 1/2 inch. The thread coarse isn't much of a concern for the wheel studs, as the thread coarse is usually standard. To lock the wheels on your pwc, I recommend…

view full answer...

Answer 5

I may have an option for you but the only locking 1/2" lugs nuts we offer are the Wheel Lock Set for 1/2" Wheel Bolts #RG01-150 which are 1/2"x20. The only option for your 1/2"x13 studs would be to use the etrailer Trailer Wheel…

view full answer...

Answer 6

The lug nuts part #12CLN would work great with the Aluminum Hi-Spec Series S5 Trailer Wheel #AM22323HWTB that you referenced and then for valve stems #AM20906 would work really well.

view full answer...

Answer 7

There are several different wheel stud sizes available but nearly all trailer wheels use 1/2 inch studs and a 60 degree taper which the lock kit part #RG01-150 would work well with. Especially on a 5 lug hub I can almost guarantee this is what…

view full answer...

Answer 8

With Wheel Lock Set for 1/2" Wheel Bolts #RG01-150 you get 2 locks and 1 key. There isn't an option for multiple wheel locks that use the same key for this product.

view full answer...

Answer 9

The Erickson Horizontal E-Track #E19148 can be cut to length for your application. We suggest using a metal saw or cutting wheel and grinder to cut the tracks to the needed length.

view full answer...

Answer 10

On an 4 foot long section of E-track #EM19147 and 2 screws every 16 inches that is a total of 6 screws in the aluminum frame. This most likely will not get you near the capacity of the E-track. I recommend bolting through the aluminum frame so that…

view full answer...

Answer 11

If it were my trailer I would fasten the E-Track to the support beams under the trailer, either the side to side one or front to back ones, by going all the way through those support beams. E-Track like #E19148 is zinc-coated steel and since the…

view full answer...