Can Erickson E-Track Be Cut to Needed Length for Trailer

Question

Question:

Can these e-tracks be cut for proper sizing in my trailor? What tool cuts them the easiest? Thanks!

asked by: Dan

0

Expert Reply:

The Erickson Horizontal E-Track # E19148 can be cut to length for your application. We suggest using a metal saw or cutting wheel and grinder to cut the tracks to the needed length.

expert reply by: Victoria B

0

Answer 1

The K-Source Snap & Zap Custom Towing Mirrors #KS80930 I feel are the best mirrors extensions for your 2024 GMC Sierra 1500. These have all the cut outs for turn signals, puddle lights and cameras you may have on your mirrors. The snap on design…

view full answer...

Answer 2

I didn't receive your photos, but the manner in which you attach the e-track to your trailer deck will completely depend on what the deck is constructed of and where exactly on the deck you'll be placing the e-track. Without knowing any…

view full answer...

Answer 3

As long as your saw is capable of cutting steel there's no reason you couldn't cut a section like the part #E19148 that you referenced.

view full answer...

Answer 4

Yes, we do have towing mirrors for a 2022 Chevrolet Silverado. I recommend the K-Source Snap & Zap Custom Towing Mirrors - Snap On - Driver and Passenger Side item #KS80930. I personally drive a Silverado and I think some of the towing mirrors…

view full answer...

Answer 5

It sounds like you will be running screws through both wood and metal to install the etrailer Horizontal E-Track - Galvanized Steel - 2,000 lbs - 94" Long - Qty 4 #e62VR. I would look for some wood-to-metal screws at the local hardware store to…

view full answer...

Answer 6

Since we don't have the 94 inch long e-track in sets of 6 you'd have to order them individually with the part #e65VR which the price for these is available at the link below.

view full answer...

Answer 7

I recommend the Fulton Hi-Mount Spare Tire Carrier #FHDSTC0101. This fits 4 to 6 lug wheels up to 16-1/2" diameter. I have included some images below showing how the carrier was mounted to the floor of the trailer angle iron to secure it to the…

view full answer...

Answer 8

In order to attach the deck boards to your open trailer, I recommend using 1/2" carriage bolts. These carriage bolts can be either zinc plated or made of stainless steel. They will need to run though both the deck board and trailer frame. In…

view full answer...

Answer 9

If you used wood screws in every hole of the E-track part #EM59150 that you referenced you'd have enough capacity to secure your 900 lb motorcycle. There isn't a one-size-fits-all method for installing the E-tracks but for your situation and…

view full answer...

Answer 10

I can help you out with the best ST205/75R15 tires for your 4,300 lb travel trailer, and since you asked for options I'll mention a couple, though the best option due to its value and quality is from Kenda: - Karrier ST205/75R15 Radial Trailer…

view full answer...

Answer 11

For your spare tire size of 205/75-15 the most popular option we offer is the CE Smith part #CE27430 which is a confirmed fit. I am not sure if this is the same feature that you are thinking of but it has a vented bottom which lets moisture escape to…

view full answer...

Answer 12

The height of where you install the E-track will depend greatly on where it will work best for the cargo you plan to tow. Most people put it around half way up or lower. But once again that will just depend on where it will work the best for you. You…

view full answer...

Can Erickson E-Track Be Cut to Needed Length for Trailer

Product Page this Question was Asked From

Continue Researching