Is Trailer Hitch Available For 2015 Volkswagen Jetta TDI Sedan?

Question

Question:

Do you have a tow hitch for a 2015 VW Jetta TDI sedan?

asked by: Jared R

0

Expert Reply:

Yep!

We have two options, a 1-1/4" receiver # C11410 and a 2" # 306-X7311 that'll fit your 2015 Volkswagen Jetta TDI Sedan.

Between the two I'd go with the 2" version # 306-X7311 as the 2" receiver gives you access to the most accessories as it's by far the most common receiver size.

If you can tell me what you'll be using your hitch for I'd be happy to recommend some accessories to get you on your journey!

expert reply by: Samuel C

0

Answer 1

I was able to find some pictures to give you a pretty good idea of what the EcoHitch Hidden Trailer Hitch Receiver #306-X7311 looks like after installation and with a bike rack as well. I reached out to EcoHitch see if I could provide you with the…

view full answer...

Answer 2

The EcoHitch part #306-X7311 has a tongue weight capacity of 300 lbs so it would by itself would have capacity for a 250 lb dirt bike, but you have to also consider the capacities of your 2015 Volkswagen Jetta TDI to make sure it also has the same…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 10

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 11

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 12

I have attached a picture below of the Curt Hitch item #C26VV installed on a 2024 Toyota Grand Highlander. I really like this hitch because the crosstube installs behind the rear bumper leaving only the 2" receiver exposed. The Curt Hitch item…

view full answer...