Will Curt RockerBall Fit Curt Ball Mount w/ Sway Control Tab for 2" Hitches

Question

Question:

Im noticing that the anti-swivel ball base is not compatible with the sway tab. Does this adversely effect the performance of this product? Also if one were to order the two inch version of this ball along with the D320 platform, is there a special anti-swivel ball base necessary to accommodate the sway tab? Thanks!

asked by: Paul W

0

Expert Reply:

The anti-swivel base on the # C45WR is missing a tab on one side to make it compatible with the sway control tab. This does not adversely impact the performance. You can use the # C40047 with the # D320 but you would have to bend or cut one of the tabs off of the anti-swivel base to make it fit since it is not available without the tab for the 2" ball.

expert reply by: Robin H

0

Answer 1

For a spare tire and wheel on your 2023 Coleman Lantern 17B use the Karrier ST215/75R14 Radial Trailer Tire - 5 on 4-1/2 - Load Range C - Galvanized Wheel #AM32182 or White Wheel #AM32181.

view full answer...

Answer 2

I would be happy to help you. We hear this complaint quite often about dealerships not wanting to install after market wiring for random reasons because they want you to purchase theirs usually. The Curt Shock Absorbing Towing Kit w/ Sway Control…

view full answer...

Answer 3

The Curt True Course Advanced Bluetooth Trailer Sway Control #C94VV wins for ease of install and it does a really good job but if you were wanting the best sway control that applies the left and right brake assemblies independently the Tuson…

view full answer...

Answer 4

If you are backing up mainly in a straight line you can leave the Reese Friction Sway Control part #83660 installed but if you end up getting into a tight enough turn you'd need to disconnect the kit.

view full answer...

Answer 5

To get maximum benefits from the sway control, a series of road tests should be taken with the loaded trailer. A great starting point you will want to loosen the tension bolt till it no longer makes contact with the unit, now tighten it up right till…

view full answer...

Answer 6

All weight distribution/sway control systems make some noise since they all rely on friction to do their job. The stand-along friction sway control devices like the Reese #83660 are best disconnected before you back up a trailer or they are likely to…

view full answer...

Answer 7

If you can't place any weight on the trailer in any way that limits a lot of the options. Basically you'd have to decide if you could fit in in the interior or use a bunk like part #CC-255 as a platform on the tongue of the trailer. This is…

view full answer...

Will Curt RockerBall Fit Curt Ball Mount w/ Sway Control Tab for 2" Hitches

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching