Replacement Mounting Hardware For a Trailer Hitch Receiver On a 2012 Audi Q5

Question

Question:

Hello. My dad bought me a trailer hitch for my 2012 Audi Q5 for my birthday and it looks like it didnt have any of the hardware with it. Are you able to send me the hardware.

asked by: Alex H

0

Expert Reply:

We do offer the Replacement Hardware Kit # RHK which you can order to get the correct replacement hardware for the Curt # C13136, etrailer # e57AR, or Stealth Hitches # 391AUDQ509 receivers. These are the receivers we carry which fit your 2012 Audi Q5, so be sure to include the hitch number when ordering. I recommend contacting the customer service department your dad ordered the receiver from to see if they can send a replacement receiver with the hardware.

expert reply by: Bud M

0

Answer 1

That's a good question but no, the bumper on your 2015 Audi Q5 will not be damaged more easily and will not be more fragile with the installation of the Draw-Tite Max-Frame Trailer Hitch Receiver #75940. The bumper support is directly replaced by…

view full answer...

Answer 2

I checked with Curt and the hitch part #C13136 fits all models of the 2018 Porsche Macan including your Turbo model. After the 2017 models there isn't drilling required so you wouldn't have to drill your 2018 model.

view full answer...

Answer 3

If you currently have a working 4-Way plug then using the 7-Way RV Upgrade Kit for Trailer Brake Controller Installation Kit part #ETBC7 kit is a great way to get a powered 7 Way connector on the rear of your 2014 Audi Q5. You can use the Curt…

view full answer...

Answer 4

We carry 3 options for the Yakima RoadShower. We have the 4 Gallon #Y79VR, the 7 Gallon #Y89VR, and the 10 Gallon #Y29VR. There are times we have a "used" item that has either been cosmetically damaged in shipping or has been used for one…

view full answer...

Answer 5

There honestly isn't too much of a guide on this. The general rule of thumb is to try to get the Yakima GrandTour 18 #YA84FR centered on your crossbars, but this basically goes for any roof cargo box on the market. You can make slight adjustments…

view full answer...

Answer 6

I attached an install diagram for the Air Lift kit part #AL88203 that fits your 1989 P30 step van and in it you can see it does not attach to the leaf spring and instead to the axle and the jounce bumper mount.

view full answer...

Answer 7

I can't recommend a weight distribution hitch for your 2019 Audi Q5 because your vehicle design prohibits it. I can recommend the Draw-Tite #76183 standard Class-III hitch paired with a Curt #17200 Sway Bar. The benefit of using a weight…

view full answer...

Replacement Mounting Hardware For a Trailer Hitch Receiver On a 2012 Audi Q5

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching