Hitch for 2018 Porsche Macan Turbo that Doesn't Require Drilling

Question

Question:

Is there drilling required for a Porsche Macan Turbo 2018? Instructions say no drilling required on 2017 models. Thanks for answering my question.

asked by: Andy

1

Helpful Expert Reply:

I checked with Curt and the hitch part # C13136 fits all models of the 2018 Porsche Macan including your Turbo model. After the 2017 models there isn't drilling required so you wouldn't have to drill your 2018 model.

expert reply by: Jameson C

1

Answer 1

The Curt hitch part #C13136 that you referenced once installed on your customers 2015 Porsce Macan S will look very similar to the picture I attached that shows it installed on an Infiniti Q5. We haven't had the chance to install this hitch on a…

view full answer...

Answer 2

The Curt 2-inch Class III hitch #C13136 is indeed a confirmed fit on your 2016 Porsche Macan but we have not yet had a local customer bring in their 2016 Macan for an installation. If/when that happens we will certainly make an installation video.…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

To replace your NOK AD2527E seal you can use #168233. It has an inner diameter of 1.688 inches and an outer diameter of 2.332 inches. Based on what I could find on the NOK AD2527E the inner diameter is the same and the outer diameter is 2.328 inches.…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...