Trailer Hitch Installation - 2014 Audi Q5 - Curt Video

The bunk boards on the CE Smith Boat Trailer #CE48810 are actually adjustable so that it can accommodate a wide variety of boat styles. If you check out the picture I attached you can see that a similar boat (might even be the same boat) fits great…

If you currently have a working 4-Way plug then using the 7-Way RV Upgrade Kit for Trailer Brake Controller Installation Kit part #ETBC7 kit is a great way to get a powered 7 Way connector on the rear of your 2014 Audi Q5. You can use the Curt…

I have a solution for you. Here at Etrailer, we strongly discourage using wheel-mounted bike racks like the Kuat NV 2.0 #NV22B for bikes with fenders. Mounting wheels with fenders can cause the fenders to crack or become damaged, especially with…

It sounds like you have a classic ground issue with the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer part #C56404 on the 2016 Audi Q5. When the wiring harness does not have a good ground connection it will make the functions act…

Most likely what you would need is the part #30717. This has a 4-way on one side of the connector that would get plugged into your Explorer and 7-way connector on the other side for connecting to your trailer. This 7-way is a 7-way blade style…

I recommend using the Curt #C13136 on your 2014 Audi Q5 Hybrid, which will provide you with a 2" hitch receiver that is well suited for towing a trailer. It looks like your Q5 hybrid has a 4400-lbs towing capacity, so you'll want to make…

In order to tow a trailer with a 2014 Audi Q5 you'll need a trailer hitch, trailer wiring harness, brake controller (if applicable), and ball mount/hitch ball. The Draw-Tite Max-Frame Trailer Hitch Receiver part #75940 is a great option to start…

Not all trailer hitches have trailer wiring mounts on them like the Draw Tite part #75940 that you referenced. I would even say that most actually do not. Especially on designs like the #75940 where only the hitch opening hangs below the rear bumper.…

Yes the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector part #C59236 does have a 4-way flat that can be turned into a 7-way connector. For just basic lighting functions the Buyers Products Trailer Connector Adapter - 4-Way to…

When using the 7-Way RV Upgrade Kit for Trailer Brake Controller Installation #ETBC7 to install the Curt Echo Mobile part #C51180 you can just tape up the blue wire of the adapter as it would not be used.

You can use the Trailer Connector Adapter #337TC1474P to replace your connection as we do not have a replacement cover for the 7-Way RV Upgrade Kit #ETBC7L. The new connector will plug in just like your current unit and has the same 4-way and 7-way…

The reason you want to run the power wire of the #ETBC7L up to the vehicle battery is because this is the circuit that the brake controller draws power from and you want it to bypass all of the vehicle wiring so as to prevent a short from damaging…