Where is the Dexter Heavy-Duty Suspension Kit # K71-359-00 Made?  

For an exact replacement the correct equalizer you'd want is the part #TREQ104. The part #K71-359-00 is a kit that includes this same equalizer but has wet bolts and heavy duty shackles and wet bolts. There isn't a similar equalizer…

The Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers #K71-359-00 will work on axles up to 8,000lbs.

Hi Jack, The 33" or 35" spacing is measured from the center of one axle to the center of the other axle (measurement C in diagram). If this isn't a new build and your just replacing suspension components then I'd recommend measuring…

We don't have an exact match, but based on your dimensions the Dexter Heavy-Duty Suspension Kit #K71-359-00 will still work for your trailer. The 1/2" difference in length and 1/8" difference in height won't be enough to impact the…

If your current shackle straps measure 2-1/4" between the bolt holes on center and your current equalizer fits 1-3/4" wide double-eye leaf springs, has a height of 2", and a length of 5-3/4" between the bolt holes on center (see…

There are many potential causes for squeaking, including worn suspension components but it could also be something like a door on the cargo trailer being a bit loose and rubbing. However, if you believe you have at least narrowed it down to your…

The Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs #AP233 is the standard suspension kit. For a heavy duty option, we have the Dexter Axle Heavy-Duty Suspension Kit for Tandem Axle Trailers - 1-3/4" Double Eye…

I have a solution for you, but the Dexter #K71-359-00 is not going to be a fit since the equalizer is only 5-3/4" wide. You could use the Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs - 3-1/8" Links #e99ZR,…

We have confirmed with Dexter that the EZ lube spindles on their axles have a standard 1/4" pipe thread fitting that can be replaced with part #Gzerk that we carry. We don't carry an angled version of this though.

We do have an option for you but you will want to measure your equalizers to make sure they will work. The axle spacing is not something to get too focused on. More than likely you will be able to use the Dexter Heavy-Duty Suspension Kit for…

The center hanger on tandem axle trailer is pretty commonly taller than the other hangers as the shackle straps and equalizers push the final height of the end of the spring up higher. Basically the longer hanger compensates for the shackle straps so…

Yes, your 14,000 lb trailer can absolutely use the Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs #K71-359-00. Then as for replacement U-bolts for your 3 inch round axle you can use U-bolts that are…