Replacement Undercover Access Hole Cover for EcoHitch Stealth Trailer Hitch

Question

Question:

I have an Eco-hitch for my 2018 Tesla Model 3. The aerodynamic under-bumper cover with magnet has rusted so much the magnet fell off. How do I get a replacement? I can send a photo if needed.

asked by: Richard B

0

Expert Reply:

It sounds like you are looking for the Undercover Access Hole Cover for EcoHitch Stealth Trailer Hitch item # 306-XA2002. I have attached a picture below so you can confirm that this is the part you need.

expert reply by: Jerred H

0

691570
(click to enlarge)

Answer 1

For your 2018 Tesla Model 3 we have two Stealth hitch options. We have the part #391TES317 which comes with a lower hitch opening that can only be used with a hitch accessory like a bike rack and we also have the part #391TES317T which includes the…

view full answer...

Answer 2

The best option for a hidden trailer hitch receiver for your 2022 Tesla Model 3 is from EcoHitch, with the correct part number for your '22 Model 3 being the following: - EcoHitch Stealth Trailer Hitch Receiver #EH84GR The Stealth has a…

view full answer...

Answer 3

We have exactly what you are looking for, two options, each from Stealth Hitch. The first option is the Stealth Hitches Hidden Rack Receiver, #391TES317. This fits a 2" hitch and is a completely hidden hitch that keeps your Tesla Model 3 looking…

view full answer...

Answer 4

The dimensions of the Undercover Access Hole Cover for EcoHitch Stealth Trailer Hitch Receiver # 306-XA2002 that you referenced is 8-1/2" long by 5-1/16" wide by 1/8" thick. Your hole being initially cut with a 4 inch hole saw would…

view full answer...

Answer 5

The access hole cover, part #306-XA2002, isn't needed for all of the 2019 Tesla Model 3 so look under your car before getting it. Some of the 2019 models have a cover installed right from the factory.

view full answer...

Answer 6

The Undercover Access Hole Cover for EcoHitch Stealth Trailer Hitch Receiver #306-XA2002 will be able to cover the access hole for your stealth hitch on your 2020 Tesla Model 3. I have linked some videos to help you see the product.

view full answer...

Answer 7

Curt hitch ball #40038 has a 1 inch diameter shank. For Curt balls with 3/4 or 1 inch diameter shanks you would use wrench #C20001. The nut on that ball should use the 1-1/2 inch end of the wrench. You could also use a large crescent wrench if you…

view full answer...

Answer 8

Curt recommends the use of 250 ft/lbs of torque when tightening the nuts of their hitch balls with a 1 inch diameter shank like the part #C40034 that you referenced. The general rule is for a 3/4" shank tighten to 150 ft/lbs For a 1" shank…

view full answer...

Answer 9

We don't have a combo of the Curt Hitch Ball #C40008 and Curt Ball Mount #C45340. The ball mount is extremely heavy-duty, rated up to 17,000 pounds. I think it's safe to assume you don't have a torque wrench rated up to 450 foot pounds…

view full answer...

Answer 10

I would not think in Spain or France that they would use foot pounds since it isn't a metric measurement. But regardless I checked with Curt and the 450 foot pounds is what you would need.

view full answer...

Answer 11

You will need a 1-1/2" wrench like part #C20001 in order to install the nut on the 2" Hitch Ball part #63845. A 1-7/8" wrench would be much too large.

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...