Correct Backup Camera System for a 2018 Grand Design Reflection That is Pre-Wired for a Camera

Question

Question:

I own a 2018 Reflection 337RLS. It’s pre-wired for a back camera, just don’t know where those connections are in the trailer. My truck has connections for cameras from the trailer. What system should I be looking at?

asked by: WD Q

0

Expert Reply:

The pre-wired camera connections should be located at the back of your trailer up near the top of the trailer. There should be a socket with the camera power wire in the center of the bracket where you'd connect the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision # FOS43TASF.

Attached is an installation video for you to check out as well.

expert reply by: Bryce D

0

Answer 1

Your picture didn't make it through but from previous customers we have determined that your 2019 Momentum 376 has a Lippert 1621 pin box on it so the Gen-Y Shock Absorbing Pin Box adapter part #GY66FR that you referenced would be the correct fit…

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 3

Since your trailer has the bracket #FRCBRKT-BL that would mean your trailer has the Furrion pre-wiring which is very common for newer RVs. The part #FOS43TASF is a fit for this and would be a really easy install. This gives you a monitor with a 4.3…

view full answer...

Answer 4

Since your 2024 Chevy Silverado 2500 with a 6-3/4' bed has the factory prep package, you will need the B&W Companion OEM 5th Wheel Hitch w/ Slider item #BWRVK3775. The Companion hitch has a 20,000 lbs towing capacity and the base has built in…

view full answer...

Answer 5

It is difficult to say without more information. It is really going to depend on the power used by the fridge and the size of your batteries. For example, a fridge like the Everchill #324-000119 uses 11-amp hours of power, so it's going to…

view full answer...

Answer 6

Yes, the 7-Way Vehicle Power Adapter #FR87PR will allow your Furrion camera system to operate correctly. Your 2023 Chevrolet Tahoe uses a Pulse Wave Modulation for the trailer lights to be able to detect errors with the trailer lighting. The adapter…

view full answer...

Answer 7

The newer Chevrolet and GM pickup trucks have a known power deficiency issue with the Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras #FCE48TASL-05. There is likely nothing wrong that you did, the problem is the…

view full answer...

Answer 8

Hey Bruce thanks for your question. You absolutely can get a replacement 7" monitor that will work with the Furrion FOS48TAPK-BL camera system on your camper. For the 7" monitor it will be part #FR47FR. You will also need a Replacement…

view full answer...

Answer 9

That's weird, the 7-Way Vehicle Power Adapter for Furrion RV Observation Camera #FR87PR should allow you to use your camper at the same time as that's what it's designed for. If you want to just avoid the adapter all together, I would…

view full answer...

Answer 10

We have the perfect solution for a camera system for your Grand Design fifth wheel trailer which is pre-wired for the Furrion camera. I highly recommend the Furrion Vision S Wireless RV Backup Camera System with Night Vision - 5" Screen…

view full answer...

Answer 11

In order for the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 5" Screen #FOS05TASF to operate in an "always on" manner you would want to wire it through your running light circuit instead of the…

view full answer...

Answer 12

Thank you for reaching out about the Furrion Vision S Wireless RV Observation Camera System w/ 3 LED Marker Light Cameras #FR98NR (or at least that's what it sounds like you're referring to). The camera and lights for this kit actually have…

view full answer...