Troubleshooting Furrion Vision S Driver Side Camera Not Working

Question:

My camera was working fine but on the last to hookups I get a no signal message only on my drivers side camera. Everything else is working fine. All the connections look tight and the clearance lamp is functioning properly.

asked by: Rodney

Expert Reply:

Thank you for reaching out about the Furrion Vision S Wireless RV Observation Camera System w/ 3 LED Marker Light Cameras # FR98NR (or at least that's what it sounds like you're referring to).

The camera and lights for this kit actually have their own separate wiring so you'll need to check the power wire for the driver side camera - this should be the red wire. Check that the connection is good but also that the wire is actually getting power. You can do this by connecting it to a different wire (like the power wire for the light) or by using a circuit tester like part # PTW2993.

Hopefully you find that there is a simple fix with the power wire for the camera. If you've checked the wiring then you might try moving that assembly to the other side of your trailer since you know that wiring setup is working.

If you're still having issues then you can either pursue the 1-year warranty if that still applies or you can replace the light/camera with part # FR85MR.

expert reply by: Jon G