Correct Heavy Duty Shackle Straps and Wet Bolts for Dexter D44 4,400 Lb Axles

Question

Question:

I have Dexter axles - D44 4,400lbs. I would like to upgrade to heavy duty shackle straps and wet bolts. What kit would be correct for me to purchase? Thank you,

asked by: Kent B

0

Expert Reply:

In order to upgrade the shackle straps and suspension bolts I recommend the MORryde Suspension Upgrade Kit for Tandem Axle Trailers, part # MR46ZR for 2-1/4" or part # MR76ZR for 3-1/8" long. I'm not able to look up which you need but all you need to do is measure the distance between each of the bolts on your existing equalizer and choose the one above that matches this.

expert reply by: Conner L

0

Answer 1

In order to retain the same suspension geometry, when you replace shackles you should use the same length replacements. Going with a shackle that is too short will not allow enough articulation in the suspension, and cause a very rough ride. Using…

view full answer...

Answer 2

To slightly lower your trailer that has had an "axle flip" kit installed you would want to use slightly shorter shackle straps, not longer ones. Shorter shackles will let the axle rest closer to the trailer frame, which lowers the…

view full answer...

Answer 3

We can get you set up with both the over/under kit and the hardware for your leaf springs. Thank you for the info on your axle capacity as it was exactly what was needed to get you the right kit, and since a 5,200 lb axle is 3 inches in diameter,…

view full answer...

Answer 4

If the shackle straps are within a 1/2" of what you normally had, say the 2-5/8" #115052 to 3-1/8" #TRSL313, you should be okay to install them. Just make sure that all of your shackle straps match though. If you are using…

view full answer...

Answer 5

The first thing I would check on your trailer is the capacity of the springs. You need to be sure the spring capacity is rated at 1/2 the axle capacity. That way 2 springs equal the capacity of the trailer axle for proper fit. Check the arch of the…

view full answer...

Answer 6

I contacted MORryde and this does happen from time to time as the weight of the trailer can spread out the axles due to downward pressure on the springs/suspension. Odds are the 35" wheel base #MR27ZR will be the correct one for you, but…

view full answer...

Answer 7

Well shackle length is mainly based on the height difference between the front and rear hangers. The rear hanger normally doesn't hang as low as the front so that the shackle can offset the difference and add the ability to move. What is…

view full answer...

Answer 8

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye…

view full answer...

Answer 9

You will measure the MORryde Suspension Upgrade Kit for Tandem Axle Trailers #MR76ZR from the center of each hole on the shackle strap.

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Hey Patrick, so for your leaf spring upgrade I am going to need to know a couple of things before I can get you over to the right part. Specifically, the length from eye to eye, the spring width, leaf thickness, and the number of leaves. From here…

view full answer...

Answer 12

In regards to the Road Armor Shock Absorbing Equalizer Kits like part #LC696740, the only difference between the blue powder coated option and yellow powder coated option is that yellow denotes aftermarket and blue denotes factory. In other words,…

view full answer...

Correct Heavy Duty Shackle Straps and Wet Bolts for Dexter D44 4,400 Lb Axles

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching