Parts Needed To Flat Tow a 2023 Ford Ranger Behind An RV Motorhome

Question

Question:

Need to prep my new ford 2023 ranger to be tow in the back of rv What cable do I need between my rv and thé ranger si the brake light work when I brake What base plate will I need Tks

asked by: Jean J

0

Expert Reply:

I recommend using the Roadmaster Direct-Connect Base Plate Kit # RM-524459-5 on your 2023 Ford Ranger. This base plate uses removable arms so when you are not towing you will still maintain a clean appearance on the front of your Ranger. The Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar # RM-676 is the tow bar I recommend using. This tow bar has integrated lights on the bars which will help with hooking up and disconnecting when it is dark.

The Roadmaster Accessory Kit for Nighthawk and Sterling Tow Bars # RM-9284-2 contains the wiring you will need for operating your tail lights on your Ranger. It also includes a storage bag, cover, spray lube, and locks to use with your connections. A Charge Line Kit # RM-156-25 is also needed to prevent your supplemental braking system from draining the vehicle battery.

If you are towing with a RV motorhome which has air brakes you will need the Demco Air Force One Supplemental Braking System # DM26VR. Otherwise the Demco Stay-IN-Play DUO Supplemental Braking System # DM86VR is for motorhomes with hydraulic brakes. I find the Demco units are the easiest to use as they are permanently mounted to the towed vehicle. Both these systems also included a braking monitor you will be able to see in your motorhome to tell when the brakes are being activated and ensure the system is operating correctly.

Finally you may or may not need a high-low adapter to raise or lower the height for the tow bars. The tow bar needs to be within 3" of level from the RV motorhome to the front of your Ranger. It is available in different heights listed below.

4" High-Low Adapter # RM-048-4
6" High-Low Adapter # RM-048-6
8" High-Low Adapter # RM-048-8
10" High-Low Adapter # RM-048-10

expert reply by: Bud M

0

Answer 1

First, before flat towing your 2011 Mini Cooper, be sure the tires are filled to the recommended psi and in good condition. More importantly, be certain your steering column is not locked; if your tires are unable to turn they would wear out quickly.…

view full answer...

Answer 2

On the Roadmaster High-Low Adapter #RM-048-10 the distance from the center of the pin hole on the shank to the front of that same shank is approximately 10-3/4 inches. From the center of the pin hole to the nearest part of the support gusset is 4-1/2…

view full answer...

Answer 3

To lower your hitch height when flat towing your Honda Fit , I recommend using the Roadmaster High-Low Adapter - 2" Hitches - 10-1/4" Rise/Drop - 10K GTW, 400 lbs TW #RM-048-10, which will give you the closest rise/drop to what you need.…

view full answer...

Answer 4

The high-low adapters that are made more for flat towing setups instead of towing a trailer, like the Roadmaster #RM-048-10 which has a 10-1/4" rise/drop, actually only decrease the tongue weight rating of your trailer hitch when you use it for…

view full answer...

Answer 5

For a 2007 Mini Cooper S Model, there is only one option, the Roadmaster EZ Base Plate Kit, #521877-1. For a tow bar, I suggest the Roadmaster Falcon 2, #RM-520. This hitch-mounted tow bar has stainless steel, telescoping arms that automatically lock…

view full answer...

Answer 6

I have a solution for you, but I do not think getting a longer hitch pin is the answer. From the picture you provided, it looks like it is the S-hook of the safety cable that is getting behind your hitch pin and the pushing into the hitch lock side…

view full answer...

Answer 7

As you mentioned in your question, the largest rise/drop high-low adapter we have available is the Roadmaster High-Low Adapter #RM-048-10, which provides a 10-1/4 inch rise/drop measurement. As you also referenced, the goal is to raise or lower the…

view full answer...

Answer 8

The reason is pretty simple. The Blue Ox #BX88132 is specifically designed for flat towing and has been rigorously tested for that purpose. The Patriot Hitch #PH54FR adjustable drop receiver adapter has NOT been tested for flat towing a vehicle,…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...