What Size Bolt Leader/Fish Wire Does etrailer Hitch for 2021 Mazda CX-9 Use

Question

Question:

what size wire bolt leader do you need for this install? is it 7/16 cariage bolts? thanks

asked by: Dave T

0

Expert Reply:

The etrailer hitch part # e87AR that you referenced actually comes with 4 bolt leaders so they wouldn't need to be supplied. The bolts are 1/2 inch though so for a replacement bolt leader you'd want the part # C58400.

expert reply by: Jameson C

0

Answer 1

The underbody panel you're referring to can be placed back on, but you'll have to trim it around the etrailer Trailer Hitch Receiver - Custom Fit #e87AR in order to get it to fit. It is a bit challenging with this vehicle so most…

view full answer...

Answer 2

No, it doesn't but I have a less expensive one that does. For your 2023 Mazda CX-9 you will want the Draw-Tite Hitch item #76020. This hitch is custom fit and bolts to your Mazda with included hardware. I really like this hitch because it…

view full answer...

Answer 3

The best trailer hitch we offer for a 2019 Mazda CX-9 to use with a bike rack is the Curt Trailer Hitch Receiver part #C13284 because the receiver tube is closer to the edge of the bumper than other options which allows for more clearance with a…

view full answer...

Answer 4

It looks like the second generation for the Mazda CX-9 began in 2016 and continues through the current model. The changes to the rear frame and bumper on the new generation were enough to require a new trailer hitch for it to fit properly. As you…

view full answer...

Answer 5

The Curt hitch part #C13284 has the best clearance for a bike rack to fit past the rear bumper. It has 5 inches from it's pin hole out to the furthest edge of the rear bumper whereas the Draw Tite #76020 has 7 inches.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has…

view full answer...

Answer 9

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a…

view full answer...

Answer 10

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 11

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 12

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like…

view full answer...