etrailer Class III Trailer Hitch Installation - 2021 Mazda CX-9 Video

The underbody panel you're referring to can be placed back on, but you'll have to trim it around the etrailer Trailer Hitch Receiver - Custom Fit #e87AR in order to get it to fit. It is a bit challenging with this vehicle so most people would…

No, it doesn't but I have a less expensive one that does. For your 2023 Mazda CX-9 you will want the Draw-Tite Hitch item #76020. This hitch is custom fit and bolts to your Mazda with included hardware. I really like this hitch because it mounts…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The wheel trays of the Swagman Chinook part #S64683 are metal and not plastic.

You will still be able to use the hands free lift gate feature on your 2021 Mazda CX-9 with the Curt Trailer Hitch Receiver #C13284 installed, but you will need to put your foot on either side of the receiver and move it in and out until you find the…

You are correct! We have had good success with the Draw-Tite Max-Frame Trailer Hitch Receiver part #76020 and the hands free liftgate operation. As stated it will block the very center where the larger portion of the hitch is but on each side it…

I have a solution for you but the Draw Tite QSP anti rattle item #63080 you referenced can only be used on Draw Tite hitches. For a similar option you will want to use the Hitch Receiver Immobilizer II item #BX88224 which can be used on etrailer…

Both of the 2 inch hitches we offer for your 2018 Mazda CX-9 will have their hitch opening below the rear bumper of the vehicle. The better option is the Draw Tite part #76020 over the Curt part #C13284 as the Draw Tite has a better price, slightly…

The lightest weight hitch mounted carrier we have available is the 32x48 Reese Solo Cargo Carrier for 2" Hitches - Steel - 400 lbs #PS1040100. This carrier weighs approximately 70-lbs and will fit in your 2" hitch receiver and is…

In order to tow a trailer with a 2018 Mazda CX-9 you'll first need to start with a trailer hitch and for this I recommend the etrailer Trailer Hitch Receiver part #e87AR which offers a direct bolt-on fit. This trailer hitch has a hidden design…

The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C56338 does not have a separate ground wire outside of the connector. You do not need to find an additional ground you will simply utilize the integrated ground in the…

You are right that there is a small trim panel underneath your 2019 Mazda CX-9 that does need to be removed when installing either the Draw-Tite Trailer Hitch Receiver #76020 or Curt Trailer Hitch Receiver #C13284. Doing this is not difficult at all…