Can Slide Topper Fit Right Next to Awning on RV

Question

Question:

My question, have a 2023 keystone avalanche 302rs, on the one slide out there is a elec awning and I would like to be able to put a slide topper on that slide, is there a special bracket kit that will allow a slide with awning also mount a slide topper?

asked by: Dennis D

0

Expert Reply:

We've had this question before and when asked about this Solera has informed us that in order for a slide topper to fit with an awning there needs to be at least 7 inches between the awning and the slide out. If you can let me know the width of your slide out I can determine what slide toppers would fit.

expert reply by: Jameson C

0

Answer 1

Thanks for that photo it was super helpful, and let's start with the easiest thing first, which is the 3 inches of clearance you have on the sides. Since slide toppers need 7 inches of clearance on the sides, what you will need to do is order the…

view full answer...

Answer 2

In order to determine if there is space for both a slide topper and standard awning on your 2020 Grand Design Reflection 303RLS you will need to have at least 3" from the inside of the flange on the side of the slide to the outside of the…

view full answer...

Answer 3

When picking out a Solera Slide-Topper for your camper you will need to measure the box width on your slide-out. The box width is measured on the outside front of the box, including flange. If the 80 inch measurement you mentioned is your box width,…

view full answer...

Answer 4

It sounds like you are trying to find a slide-topper to fit your slide-out that will not interfere with the adjacent slide-out with slide-topper. If this is the case then the slide-topper you select will need to have fabric that does not cover the…

view full answer...

Answer 5

The smallest Solera slide topper that we currently offer is the Solera RV Slide-Out Awning #LC23FR, which fits 60"' wide slide outs. That being said, at 56" you'd still be within the useable range and would just have a bit extra…

view full answer...

Answer 6

If the fabric on your Solera RV Slide-Out Awning - 6'7" Wide - 48" Projection - White #LCV000163285 is laying loose with no tension you've most likely lost the required amount of tension on your tension springs. You'll want to…

view full answer...

Answer 7

The correct Solera RV Slide-Out Awning for an 81" and 84" slide-out is part #LCV000165062 for black or part #LCV000163287 for white. The awning fabric measures 85" long.

view full answer...

Answer 8

For your 79" slide out I recommend the Solera RV Slide-Out Awning - 6'7" Wide - 48" Projection - Black Item #LCV000168105. For the 153" slide out I recommend the Solera RV Slide-Out Awning - 13'1" Wide - 48"…

view full answer...

Answer 9

The Furrion Arctic RV Refrigerator with French Doors - Black Glass #FR42PJ does come in stainless steel with part #FR62PJ. While running this refrigerator can pull 11 amps per hour with an estimated 1.8kWh per day. That being said, there are a lot of…

view full answer...

Answer 10

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack that…

view full answer...

Answer 11

A drop axle certainly can make it tough to reach the star wheel adjuster on a drum brake. The adjuster spoon tool we offer #W80630 has a 90-degree bend that will often let you get access to the adjuster even on a drop axle. Essentially you will need…

view full answer...

Answer 12

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Can Slide Topper Fit Right Next to Awning on RV

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching