bing tracking image
Q & A Icon

Recommended Slide-Topper for Slide-Out with Adjacent Slide-Out with Slide-Topper  

Question:

My slide out to out flange is 154 and the actual box is 148. The rail is flush on the right side and 2 past the left side. The problem is from the edge of the flange to the existing awning arm is only 1 3/8. You suggested a shorter awning in the previous question which is ok with me.

0

Expert Reply:

It sounds like you are trying to find a slide-topper to fit your slide-out that will not interfere with the adjacent slide-out with slide-topper. If this is the case then the slide-topper you select will need to have fabric that does not cover the entire length of the slide-out. This will ensure that the torsion arms won't extend out past the flange and come in contact with your adjacent slide-topper.

For this, I recommend the Solera 12' Slider (Slide-Topper) with Hardware part # LCV000139496 for white or part # LCV000168328 for black. The fabric on either of these slide-toppers measures 12' long which means the torsion arms which are adjustable will not stick out past the flange of the slide-out. This will be the best fit slide-topper we have for your needs.

I have attached a review video for you.

expert reply by:
0
Conner L

Products Referenced in This Question


Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>