Trailer Hitch Receiver For 2000 Chevy C3500 Cab & Chassis That Does Not Require Drilling

Question

Question:

Sirs , I have a 2000 c3500 cab and chassis I am trying to locate a hitch for . Seems the sizes are the same as a standard dually truck . The frame is 34 inches . The center to center hole width is 30.5 inches . The frame holes are 9 and 12.5 from the rear hole. The truck sits rather high as it has overload springs so a deeper would be great . Thank you for any help . Seems i cannot find an exact fit and i do not want to weld or drill to guess if its secure.

asked by: Edward M

0

Expert Reply:

There is a one option for a hitch that fits your 2000 Chevy C3500 cab and chassis that does not require drilling, made by Curt:

- Curt 3-Piece Trailer Hitch Receiver # C15511

The # C15511 does not require any welding either, and uses the frame holes that you mentioned.

expert reply by: Kyle S

0

Answer 1

I am going to need a bit more information in order to make a good recommendation. Is your 2010 Ford E450 a Cab and Chassis style or an RV cut-away. I spoke with my contact at Cequent, and they said that what you would have to do to determine if a…

view full answer...

Answer 2

For vehicles with utility beds we aren't going to have a custom fit hitch available but we have a universal fit hitch that would work well. It will require a more in-depth install though. I spoke to my contacts at Curt and Reese and the…

view full answer...

Answer 3

Pictures can sometimes be deceiving. The holes in the side brackets for the hitches that fit cab and chassis models of the 2015 Ford F-350 are not actually in a straight line. They are off-center from each other. This is shown well on Draw-Tite…

view full answer...

Answer 4

Yes, the B and W hitch part #BWHDRH25198 will work as a replacement for the OEM hitch of your 2006 Ford F-350. It does use 3 bolt per side like you mentioned but it has been tested and has a capacity of 16,000 lb trailer weight.

view full answer...

Answer 5

I was able to get the measurement of the distance from the bottom of the frame to the top of the receiver on the Draw-Tite #41943- which is roughly 8.75". Draw-Tite was not able to provide me with the other measurement you're asking…

view full answer...

Answer 6

The distance from the top of the mounting flange to the top of the receiver tube on the B&W Heavy-Duty Trailer Hitch Receiver part #BWHDRH25198 is around 7-3/8". The distance from the top of the mounting flange to the top of the…

view full answer...

Answer 7

The only styles of hitches that can be made to fit a service body truck like yours are multi-fit RV hitches like the #41990 that has a 16k capacity. This is a weld on hitch that would require either the 7 inch drop brackets part #4907 or the 16 inch…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Trailer Hitch Receiver For 2000 Chevy C3500 Cab & Chassis That Does Not Require Drilling

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching