Dimensions from Bottom of Frame to Top of Receiver on Draw-Tite 41943 on 2000 Ford F-550

Question:

What is the measurement from the bottom of the frame to the top of the receiver for hitch 41943? This would be for an F550 installation. Also if you have the hole location dimensions for the hole in between the rivets that would be useful

asked by: Dan

Expert Reply:

I was able to get the measurement of the distance from the bottom of the frame to the top of the receiver on the Draw-Tite # 41943- which is roughly 8.75". Draw-Tite was not able to provide me with the other measurement you're asking for though, but my contact thought it was about 3". With that said, he did mention that if you measure from the top of the frame to the center of the existing bolt hole that's there you should be able to get this distance.

expert reply by: Erik B