Adapter Needed to Fit Pullrite 2900 Fifth Wheel Hitch to 2020 Ford F-450 OEM Pucks

Question

Question:

Good evening, I have a 2020 Ford F450 crew cab diesel platinum with puck style package. The 5th wheel Hitch I have is a pullrite 2900 slider hitch, the 20k model. I am trying to find the correct curt rail to oem puck 5th wheel mounting system for this combination. Thank you for your time!

asked by: Tyson R

0

Expert Reply:

Since the Pullrite 2900 hitch was designed to fit industry standard fifth wheel rails the Curt Adapter part # C88KR that you referenced would work for you. This fits the OEM pucks of your 2020 Ford F-450 and provides rails that the 2900 was designed to fit.

expert reply by: Jameson C

0

Answer 1

The best 5th wheel hitch available for the 2020 Ford F-450 Super Duty Long bed is the B&W Companion OEM 5th Wheel Hitch for Ford Super Duty Prep Package 25,0000 lb capacity part #BWRVK3305. The B&W Companion is one of the best fifth wheel…

view full answer...

Answer 2

For the Furrion Vision S side camera/marker light kit #FCE48TASL the brown wire goes to running light circuit for the light to come one, the black goes to ground, and the red is your trigger wire for the camera to turn on. This allows you to decide…

view full answer...

Answer 3

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 4

Yes, you can use the PullRite SuperGlide 2900 Model 5th Wheel Hitch on a 2016 Ford F-250 Super Duty with the Curt Custom 5th Wheel Installation Kit for Ford part #C16424-104 (part #C16104 + part #C16424).

view full answer...

Answer 5

The Ford OEM puck system is different than the Chevrolet/GMC OEM puck system therefore, you can't use a 5th wheel hitch from one in the other. The Ford OEM system has pucks which are much closer together than on the Chevrolet/GMC OEM system. The…

view full answer...

Answer 6

The factory prep package or pucks are not the same between Ram, GM and Ford. The spacing is all different which means you cannot use a 5th wheel hitch for Ram pucks on a GM with pucks. Take the Curt A25 5th Wheel Trailer Hitch for example which is…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

The head alone for the B&W Companion hitch #BWRVK3500 weighs about 70 pounds. Everything else weighs about 130 pounds. So the total weight of the hitch is approximately 200 pounds.

view full answer...

Answer 11

Most fifth wheel rails are made to the same industry standard dimensions. They aren't all though. If you measure 22 inches on center between the two rails and they look like the rails of the #RP30035 that you referenced they would be the industry…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...