Will Brophy Clamp On Camper Tie-Downs Fit a 2012 Ford F-150 with 6-1/2' Bed

Question

Question:

Can you confirm this will fit a 2012 f150 with a 6.5 ft bed?

asked by: Mike

0

Expert Reply:

Yes, the Brophy Clamp On Camper Tie-Downs part # HSWB are a fit for a 2012 Ford F-150 with 6-1/2' Bed. If you're looking for some turnbuckles to go with these, I recommend the Brophy Basic Turnbuckles part # TDHP. I have attached a review for you with some tips on install.

expert reply by: Conner L

0

Will Brophy Clamp On Camper Tie-Downs Fit a 2012 Ford F-150 with 6-1/2' Bed
(click to enlarge)

Answer 1

The support braces in the HappiJac Truck-Mounted Camper Tie-Downs #LC182860 are going to attach to the cross frame to provide support for the anchors which will bolt through the bed wall and into the braces. The rear anchors will bolt through the…

view full answer...

Answer 2

There are some trucks that the Brophy Clamp On Camper Tie-Downs, part #HSAB will not fit and your 2005 F-150 is among that list. We do have tie-downs that will fit your truck but there are a few things that are required to make sure you get a good…

view full answer...

Answer 3

Since the Brophy stake pocket mount tie downs, #TDSF, bolt into place, you would just need to un-bolt them from the truck to remove them for the season. It would be a good idea to then apply some sort of rust prevention where the hardware for the…

view full answer...

Answer 4

For a 2017 Ford F-350 Super Duty DRW, with 8' bed and without board or step underneath truck bed. You have the very cost effective option of the Brophy Clamp On Camper Tie-Downs, #HSWB which are powder coated steel brackets that securely clamp…

view full answer...

Answer 5

We have just what you are looking for. The part #A10-1530DVP will plug in to the 110 receptacle of your generator and would give you a 30 amp female connector for the RV to plug into.

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

The primary advantage of frame-mounted camper tie-downs like the TorkLift #TLF2012A and #TLF3001A, which are designed to fit your Ford F-350 if it has the 6-3/4 foot bed without a step/board underneath and a factory hitch, is the stability they…

view full answer...

Answer 8

According to CR Brophy, the camper tie down brackets you'd looked at, part #HSWB are specifically designed to fit the bed of a 2019 Ford F-250 and 350. There does indeed need to be 2 inches of available space under the lip of the truck bed side…

view full answer...

Answer 9

Hey Brian, so according to TorkLift they don't have any tie downs for the front but for the rear you are going to want the TorkLift Camper Tie-Downs #TL54FR. Since your truck has factory running boards that extend under the bed, there aren't…

view full answer...

Answer 10

Yes, it will! The Hellwig Adjustable Big Wig Rear Anti-Sway Bar item #HE96XR is confirmed to fit your 2024 Chevy Silverado 3500. This sway bar will minimize lateral movement in your rear end and improve stability. This sway bar is made in the USA and…

view full answer...

Answer 11

The Brophy Slide In Camper Tie-Downs #HSAB might be a fit for your 2011 Ford F-150 but you'll need to do a bit of measuring first and you'll likely need to trim out holes where the tie-downs would sit. You'll want to verify that #HSAB…

view full answer...

Answer 12

The 1-5/16" Hellwig Adjustable Big Wig Rear Anti-Sway Bars are designed for 2WD #HE97MR or 4WD #HE94FR versions of your 2021 Ford F-250. These are both designed for trucks which have a stock ride height. Hellwig does offer their 2" Lift…

view full answer...