Is 2" Difference in Trailer Coupler Height Okay for Blue Ox SwayPro Weight Distribution

Question

Question:

I have a Blue Ox Sway pro with a 7 hole 2” shank. When the ball is mounted on the lowest hole, there is still a two inch difference too high for my camper to remain perfectly level as it is when it is off the ball. Will that impact the sway control? Or should I get the 9 hole shank so I can keep it perfectly level. How much wiggle room is there? I have a TV that exceeds the tongue wt by 2x so there is very little movement of the truck when I hitch up.

asked by: Flo

1

Helpful Expert Reply:

Thanks for reaching out!

The biggest difference between hitch receiver height and trailer coupler height is 1", so for your application I do recommend using the 9-hole shank # BXW4002 so you can get to that level setup.

Keeping the trailer level is the best way to get the best tracking and towing performance from your trailer which is why I recommend going this route instead of being a little nose-high for your trailer tongue.

Attached is a review video for you to check out.

expert reply by: Jon G

1

Answer 1

Yes, the Blue Ox weight distribution shank part #BXW4002 that you referenced uses the same bolt pattern as the Reese weight distribution systems so this would work well for you.

view full answer...

Answer 2

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 3

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Answer 4

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 5

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 6

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 7

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 10

On equalizer 013-105-04 in kit #K71-360-00 the eye center to eye center measurement is approximately 7-1/2 inches.

view full answer...

Answer 11

You can get a new brake mounting flange for your axle. The old flange will need to be cut off. The part is #4-44-1. This is designed to fit a 3 inch trailer axle and should be welded in place by a professional. Since you would also have to get the…

view full answer...

Answer 12

We do carry electric brake assemblies as well as hub/drum assemblies. To determine the correct fit, you will need to measure the spindles of your axles. I've attached a photo to assist with the measurement locations, and recommend using a digital…

view full answer...

Is 2" Difference in Trailer Coupler Height Okay for Blue Ox SwayPro Weight Distribution

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching