Review of Blue Ox Weight Distribution Hitch - BXW4002 Video

Measuring on the ground to the inside point of contact of each tire is the correct way to determine which chock setup you need. Yours being 16 inches at the closest point would most likely fall within the 16 to 24 inch range of the #FA84-00-4840.

The two 3/4”-10 x 4-1/2” Hex Head Bolts in the Replacement Hardware Kit for Blue Ox 2-Point Weight Distribution Hitch #BLU58XR will need a 1-1/8" socket and will need to be torqued to 250-ft.-lbs. Attached is a product overview video for you to…

The weight of the weight distribution hitch actually does not count towards the tongue weight of the vehicle or trailer due to its role in the weight distribution process. Due to this even though the Blue Ox TrackPro Weight Distribution w/ Sway…

Yes, you can use the head, shank, and hitch ball part of the Blue Ox TrackPro Weight Distribution part #BLU36FR for standard towing when you don't need weight distributing properties. It would basically act as an adjustable ball mount. That said,…

You do need to get your trailer to sit as level as possible when towing if yours is now totally level with the spring bars connected you are fine in that regard and ready to tow. I would recommend making sure you have the spring bar tension set for…

Yes, since the hitch of your 2007 Nissan Frontier is weight distribution rated you can use the Blue Ox TrackPro Weight Distribution system #BLU36FR.

I have attached for you below the pairing procedure for the Voyager WiSight Wireless RV Backup Camera System part #ASA84YR. Please note, a mistake I have made in the past was applying power to the camera too soon, this cannot be done until the…

The 10K towing/1K tongue Blue Ox SwayPro Weight Distribution #BXW1000 is the perfect capacity to accommodate your towing setup. Just keep in mind that cargo sitting behind the rear axle on your 2014 Chevy Silverado 3500HD will also count as tongue…

There are a few differences between the BAK Revolver X2 and X4s tonneau covers. The X4s is the newest cover available by BAK, so it includes a new matte black finish on all sides, whereas the X2 will be matte on the top, and then silver on the…

The BAK Revolver X2 Hard Tonneau Cover #BAK39602 referenced in your question will need to be fully open, up to the truck's cab, or fully closed down at the tailgate in order for it to be secured by the built-in straps and buckles. It can…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

We do not have any hitch covers made for 3" hitches. In fact there is only one hitch cover made for 2-1/2" hitch receivers which is the Curt Hitch Cover #C22277. Having a 3" hitch receiver limits your options whenever you want to use…