Complete Trailer Hitch And Wiring Kit for a 2023 Toyota Highlander

Question

Question:

Will this fit my 2023 Toyota Highlander? I want to make sure first before buying.

asked by: Damien

0

Expert Reply:

Yes, the etrailer Trailer Hitch Receiver # e75ZR is a confirmed fit for your 2023 Toyota Highlander.

This trailer hitch has a maximum towing capacity of 5,000-lbs, a maximum tongue weight capacity of 500-lbs, and has a bolt-on no welding required, installation using the included hardware.

Additionally, you may be also interested in completing your towing setup. In this case, you are also going to need a ball mount # C45534, as well as a wiring harness # C59496

expert reply by: Bryce D

0

Answer 1

The 2014 Toyota Highlander is a 3rd generation model while the 2023 Toyota Highlander is the most recent 4th generation model so you'll need a different trailer hitch than what's on a 2014, and for that I recommend the etrailer Trailer Hitch…

view full answer...

Answer 2

We do list a note in our installation notes that does warn that there is a possibility that the Hands Free Liftgate sensor functionality may be limited or lost with the etrailer Trailer Hitch Receiver #e75ZR installed on your 2022 Toyota Highlander…

view full answer...

Answer 3

I would be happy to help clarify the confusion and set your 2022 Toyota Highlander XSE up with a hitch for your bike rack. The etrailer Trailer Hitch Receiver item #e75ZR does fit your Highlander XSE. This hitch is custom fit and bolts directly to…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 7

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 8

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Since your 2024 Toyota Grand Highlander doesn't come with the factory tow package you need the Curt T-Connector Vehicle Wiring Harness #C79VV. The module plugs into that 10-Pin connector you found under the cup holder and then the 4-Way harness…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...