Hub/Drum and Brake Assemblies that Fit 3,500 lb Spindle # TRU74FR
Question:
Will these parts work properly together? Im building a trailer and want to ensure that Im buying the correct stuff. 1 TRU74FR 2 AKHD-545-35-EZ-K 3 AKEBRK-35-SA 4 BK2-100 Thanks,
asked by: Rob M
Expert Reply:
Yes, everything you mentioned is compatible. The spindle part # TRU74FR is compatible with the hub/drum part # AKHD-545-35-EZ-K which is also compatible with the brake assembly set you mentioned of # AKEBRK-35-SA. The bearing kit part # BK2-100 is correct too but the hubs already come with them so they would not be needed.
Products Referenced in This Question
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
#84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- 1-3/4 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: Can DM15349-52 Demco Coupler Mount Be Welded in Place
- Video: Demco A-Frame Trailer Coupler - Standard Coupler - DM14793-95 Review
- Video: Curt Tie Down Anchors - Trailer Tie-Down Anchors - C83760 Review
- Shop: Rubber Bumper for Enclosed Trailer Ramp Door - 2-1/2" Diameter
- Shop: Demco A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Zinc - 2" Ball - Bolt On - 10K
- Shop: Curt Heavy Duty D-Ring Tie-Down Anchor - Weld On - 4-1/4" Wide - 8,833 lbs
- Shop: Brophy D-Ring Tie Down Anchor - Bolt On - 1/2" Diameter - 2,000 lbs
- Shop: Demco 50-Degree A-Frame Coupler without Jack Hole - Channel Mount - Silver - Bolt On - 14,000-lb
- Q&A: Bearing Kit Replacement For Lippert 4,400 lb Axle
- Shop: RV Power Cord
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Q&A: Ways To Determine Bearing Sizes Used On a Dexter 3500LB Trailer Axle
- Q&A: Does Race Need To Be Replaced If Installing New Bearings
- Q&A: Do Hub Races Have to Be Replaced Each Time Bearings Are Changed
- Q&A: Bearing Kit Recommendation For Hub that Has Bearing Numbers L44649 and L68149
- Q&A: Which Bearing Kit With Grease Seal Will Fit My Dexter 3500 Pound EZ Lube Axles
- Article: Trailer Wiring Diagrams
- Video: TruRyde Bearing Kit for #84 Spindle Installation
- Search Results: akebrk~35~sa
- Search Results: tru74fr
- Search Results: bk2~100
- Search Results: akhd~545~35~ez~k
- Search Results: trailer wheels center caps
- Search Results: baby moon
- Search Results: 10 19 seal
- Video: Optronics Mini LED Side Marker Light Installation
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Video: Dexter Trailer Hubs and Drums - Hub - 8-259-50BTUC1 Review
- Article: Most Popular Wheel Bearings
on Trailer Bearings Races Seals Caps
