Replacement Bearing Kit Recommendation for 3,500 lb Dexter Axle
Question:
Hello! Use a Dexter Axle. Only number I can find is on the seal. The # is : 00-610-010. Dexter says they never heard of this number. This is used on a 3500lb axle,serial # 152659043. I wish to replace the bearings,races,and seals on both sides.
asked by: Larry M
Helpful Expert Reply:
The standard 3,500 lb axle uses the Hub Bearing Kit # BK2-100 which is for a #84 spindle. If your axle is a 1990 or newer then you likely need these parts but if it's older then I'll need you to measure your spindle to make sure we can get you the parts that fit correctly. Attached is a photo showing where you'll need to measure the spindle and here are the dimensions for the bearing kit I referenced above in case you want to double check on your end:
Inner Bearing - # L68149 (1.378" ID)
Outer Bearing - # L44649 (1.063" ID)
Grease Seal - # 58846 (1.719" ID and 2.565" OD)
Attached is an installation video of this bearing kit for you to check out.
Products Referenced in This Question
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: Will The Kodiak Disc Brakes Kit # KOD49FR Fit In EZ Loader Trailer With 3,700LB Axle?
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Search Results: wheel center cap 425
- Shop: DeeMaxx Single Disc Brake Assembly - 10" Hub/Rotor - 5 on 4-1/2 - Maxx Coating - 3,500 lbs
- Q&A: Recommended 23" Long Gas Strut fo a Camper Door
- Shop: Camco RV Vinyl Trim Insert - Black - 100' Long x 1" Wide
- Search Results: water caddy
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Search Results: brake line
- Search Results: brake tee
- Video: TruRyde Bearing Kit for #84 Spindle Installation
- Shop: 7-Piece Installation Set for Bearings, Races, and Seals
- Shop: Universal Gas Strut - 15 to 25 lbs Force - 19-5/8" Extended Length - 8-3/16" Stroke
- Search Results: grease
- Q&A: How to Determine the Bolt Pattern of a Trailer Wheel
- Search Results: bearing tools
- Search Results: bearing grease
- Video: TruRyde Electric Trailer Brake Kit Installation
- Q&A: Can Trailer Tire Size of ST205/75-14 be Replaced with ST215/75-14
- Q&A: Determining If 205/75R14 Tires On 2015 R-Pod 178 Should Be Upgraded To Prevent Blow Outs
- Q&A: Can a ST215/75R14 Replace a ST205/75R14 on a Trailer
- Q&A: Highest Capacity Trailer Tire for 14 inch Rim
- Video: Review of DeeMaxx Trailer Brakes - 3.5K 10 Inch Maxx Coat Disc Brake Assembly - DE89YR
- Video: Review of Taylor Made Boat Accessories - Hatch Parts - 3691835
- Shop: Trailer Hitch
- Video: JR Products Coupler Pin Review 37201281
- Video: Buyers Products Hitch Pins and Clips - Snapper Pin - 337P11C Review
- Video: Redline Hitch Pins and Clips - Snapper Pin - 516-214 Review
- Shop: Fifth Wheel Hitch