Bearing Kit Replacement For Lippert 4,400 lb Axle
Question:
I need a bearing kit for a Lippert 4400lbs axle. The axle number is LCI44-SBA-86-68.5-NOSP-US-L-655-7278-18PT. Thanks
asked by: Zachary C
1
Helpful Expert Reply:
Lippert's 4,400 lb axles use the same bearings as 3,500 lb axles so the correct replacement bearing kit is the following:
- Bearing Kit # BK2-100
If you are looking for grease as well, I recommend Bearing Grease # L11380, and for a bearing packer I recommend the Bearing Packer # PTW1218.
expert reply by:
Kyle S
1
Products Referenced in This Question
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
LubriMatic Prime Guard High Temperature Wheel Bearing Grease - Red - 16-oz Can
- Lubricants Sealants Adhesives
- Grease
- Brake and Bearing Grease
- Lithium Complex-Based
- Standard Bearing Grease
- Polyurea - Conventional
- 16 oz
- LubriMatic
more information >
Continue Researching
- Search Results: dexter equalizer
- Shop: Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: LubriMatic Prime Guard High Temperature Wheel Bearing Grease - Red - 16-oz Can
- Shop: Seal Puller
- Shop: RV Power Cord
- Shop: MORryde X-Factor Crossmember for Standard Frame Hangers
- Shop: Timken Replacement Trailer Wheel Bearing - LM11949
- Shop: Bearing Kit, 14125A/25580 Bearings, GS-2125DL Seal
- Video: Performance Tool Plastic Bearing Packer Review
- Video: MORryde Standard Frame Hanger X-Factor Crossmember Review
- Search Results: seal puller
- Search Results: lippert 4400 lb axle
- Search Results: grease caps
- Search Results: trailer bearings races seals caps
- Search Results: rubber plug
- Search Results: timken bearing for dexter 3500 lb axles
- Q&A: Brake Pad Thickness of New Dexter 3,500 lb Brake Assembly
- Q&A: Which Bearing Kit With Grease Seal Will Fit My Dexter 3500 Pound EZ Lube Axles
- Q&A: Do Hub Races Have to Be Replaced Each Time Bearings Are Changed
- Q&A: Does Race Need To Be Replaced If Installing New Bearings
- Q&A: Hub/Drum and Brake Assemblies that Fit 3,500 lb Spindle # TRU74FR
- Q&A: Ways To Determine Bearing Sizes Used On a Dexter 3500LB Trailer Axle
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: How to Jack Up Trailer for Equalizer Replacement