Bearing Kit Recommendation For Hub that Has Bearing Numbers L44649 and L68149

Question

Question:

Im looking for some boat trailer wheel bearings parts...Can you help me with what parts to buy or if theres a kit available? Im looking to do all 4 wheels...these are the specs Ive gotten straight from EZLOADER Spindel: 1.688 ID 2.32 OD Bearings: L44649 Outside Bearing L44610 Outside Race L68149 Inside Bearing L68110 Inside Race Seal: CR16657

asked by: Dennis

0

Expert Reply:

The bearing kit you need is the part # BK2-100 that comes with everything you would need for your number 84 spindle on your trailer.

expert reply by: Jameson C

0

Answer 1

Lippert's 4,400 lb axles use the same bearings as 3,500 lb axles so the correct replacement bearing kit is the following: - Bearing Kit #BK2-100 If you are looking for grease as well, I recommend Bearing Grease #L11380, and for a bearing packer I…

view full answer...

Answer 2

You can use the other components you remove from your hubs. After you have removed the hub components you will want to inspect all of the parts and replace if you find any discoloration or signs of wear or damage such as a nick. On the race you can…

view full answer...

Answer 3

Yes, everything you mentioned is compatible. The spindle part #TRU74FR is compatible with the hub/drum part #AKHD-545-35-EZ-K which is also compatible with the brake assembly set you mentioned of #AKEBRK-35-SA. The bearing kit part #BK2-100 is…

view full answer...

Answer 4

There are going to be 2 ways to find out what size spindle is on your Dexter 3500lb axles under your car trailer. First every Dexter axle manufactured after April 2001 will have a serial number stamped on the rear of the axle tube near the passenger…

view full answer...

Answer 5

You have the correct parts selected for your Dexter EZ Lube axles. The Bearing Kit for #84 Spindle, L44649/L68149 Bearings, 10-19 Double Lip Seal, item #BK2-100, contains the Inner bearing and race, outer bearing and race, grease seal and cotter pin.…

view full answer...

Answer 6

We have ecerything you need! For the LM67048 Bearing, you'll need: -The Replacement Trailer Hub Bearing #LM67048, For the 25580 Bearing, you'll need: -The Replacement Trailer Hub Bearing #25580, For the LM67010 Race, you'll need: -The…

view full answer...

Answer 7

You can check the condition of your hub's races by carefully removing all bearing grease with a rag to expose the actual surface of the races. When they are completely free of grease, etc., inspect them for any signs of scoring (very slight…

view full answer...

Answer 8

The Electric Trailer Brake Kit part #AKEBRK-35 comes with two braking assemblies (one left and one right) which is enough for one axle. Therefore, if you have tandem axles and want to replace all braking assemblies you will need to order a quantity…

view full answer...

Answer 9

From the pictures you provided, you have a UFP DB-42 disc brake set up on your 2008 Trail-Rite. This isn't something we carry, but it looks like these systems use the #L68149 inner bearing and the #L44649 bearing, so you do have a common spindle…

view full answer...

Answer 10

For a 3,500 lb axle bearing kit what you'd want is the #BK2-100 and you'd be set. This comes with the needed bearings and seal.

view full answer...

Answer 11

Yes, the Electric Trailer Brake Kit - Self-Adjusting #AKEBRK-35-SA that you referenced are an exact replacement for the AxleTek assemblies you have now that have Axletek-10-GG stamped on them. If you check out the attached picture you can see the…

view full answer...

Answer 12

The #TRU84FR spindle is rated for 3,500 pounds and uses bearings #L68149 and #L44649. We have some 6-lug hubs that fit but they aren't 6 on 6 they're 6 on 5-1/2 like part #AKHD-655-35-EZ-K. We only carry two hubs with a 6 on 6 pattern and…

view full answer...

Bearing Kit Recommendation For Hub that Has Bearing Numbers L44649 and L68149

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching