Does Race Need To Be Replaced If Installing New Bearings
Question:
I have Dexter 25580 bearings and Dexter 25520 races. Can I just replace the bearings using your 25580 bearings or do I need to replace the races from the same manufacturer as the bearings? The races are not pitted and in good shape.
asked by: Keith
Expert Reply:
You can use the other components you remove from your hubs.
After you have removed the hub components you will want to inspect all of the parts and replace if you find any discoloration or signs of wear or damage such as a nick. On the race you can inspect it and if you see any marks you are not sure about, run your fingernail over the mark and if it catches you should replace the race. The # 25520 is the race you would need for the # 25580 bearing.
Products Referenced in This Question
Replacement Race for 25580 Bearing
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 3.265 Inch O.D.
- Bearing 25580
- Race 25520
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.750 Inch I.D.
- Bearing 25580
- Race 25520
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Bearing Kit, 14125A/ 25580 Bearings, 10-36 Seal
- Shop: Bearing Kit, 14125A/25580 Bearings, GS-2125DL Seal
- Shop: Replacement Trailer Hub Bearing - L44649
- Shop: Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased
- Shop: Bearing Kit, LM67048/25580 Bearings, 10-36 Seal
- Search Results: dexter wheel bearings
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Q&A: Do Hub Races Have to Be Replaced Each Time Bearings Are Changed
- Search Results: 10000 lb axle kit
- Q&A: When Should Trailer Wheel Bearings be Replaced
- Q&A: Is There a Way to Tell Difference Between 12k and 15k Trailer Brake Assemblies
- Q&A: Bearing Kit for Dexter 5200 pound Axle
- Search Results: dexter d52
- Search Results: dexter washer
- Search Results: dexter hub assembly
- Video: TruRyde Bearing Kit for #84 Spindle Installation
- Q&A: Recommended Timken Races And Bearings For A Dexter Axle
- Search Results: bk3~200
- Search Results: cre3000
- Q&A: Can The MORryde Suspension Upgrade Kit MR46ZR Be Used With Lippert Road Armor Equalizers
- Q&A: Timken Replacement Bearing Solution for Setup with Part Numbers L44649 471750 L44610
- Video: Hopkins LED Breakaway Switch Review
- Article: Testing Trailer Brake Magnets for Proper Function
- Shop: Trailer Hitch
- Article: Most Popular Wheel Bearings
- Article: Overview of Lubricating Grease
- Article: Trailer Tire Sizing
- Article: RV Roof Types: What Type of Roof Does My RV Have?
- Shop: RV Power Cord