Does Curt Trailer Hitch Receiver Fit 2023 Ford Mustang Mach-E

Question

Question:

Does the Curt trailer hitch fit on the 2023 Ford Mustang Mach-E?

asked by: Neil

0

Expert Reply:

It does! I can confirm for you that the Curt trailer hitch is a fit for your 2023 Ford Mustang Mach-E. I verified this directly with the manufacturer for you, and the correct part number is the following:

- Curt Trailer Hitch Receiver # C77ER

The # C77ER has a 2" receiver, is a bolt-on installation so you don't have to do any type of drilling into your Mustang Mach-E's frame, and has a hidden crosstube so the only part showing is the receiver, which is great because it allows your Mustang to retain its appearance.

expert reply by: Kyle S

0

Answer 1

There are a couple options currently available for the 2021 Ford Mustang Mach-E. There is the Curt Trailer Hitch Receiver, #C77ER and the Draw-Tite Max-Frame, #DT92MR. Each of these options install in a similar way and do so without the need for…

view full answer...

Answer 2

I'd recommend the US made Curt Class III hitch, part #C77ER. Ford doesn't recommend towing with your vehicle, but using a hitch as an attachment point for a bike rack would work just fine.

view full answer...

Answer 3

As we haven't had the chance to install either the Curt #C77ER or the Draw-Tite #DT92MR on a 2021 Mustang Mach-E, I went out and measured from the center of the first bolt hole to the end of the receiver opening on both hitches. The Curt will sit…

view full answer...

Answer 4

The hitch that would limit access to the hands free liftgate option of your 2021 Ford Mustang Mach-E the least would be the Curt part #C77ER as there is a bit less material around the hitch tube compared to the Draw Tite #DT92MR. With either option…

view full answer...

Answer 5

It isn't the actual bumper, but you will need to trim the fascia underneath your 2023 Ford Mustang Mach-E to install the Draw-Tite hitch that fits, which is the following part number: - Draw-Tite Max-Frame Trailer Hitch Receiver #DT92MR. I have…

view full answer...

Answer 6

I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2", part #DT92MR, hitch receiver. This hitch receiver has a maximum tongue weight of 350lbs and a maximum tow weight of 3500lbs. I like the Draw-Tite hitch…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 12

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...