bing tracking image
  1. Trailer Hitch
  2. CURT
  3. Class III
  4. 2 Inch Hitch
  5. 2000 lbs GTW
  6. Concealed Cross Tube
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Item # C77ER
Retail:$386.95
Our Price: $260.88
You Save: $126.07
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Shipping Weight: 33 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part number C77ER can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (23)
  • Q & A (0)
  • Photos

CURT Trailer Hitch - C77ER

  • Class III
  • 2 Inch Hitch
  • 2000 lbs GTW
  • Concealed Cross Tube
  • CURT
  • 200 lbs TW
  • Custom Fit Hitch

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Sturdy, square-tube design
  • Ball mount, pin, and clip sold separately
  • Hitch assembled in the USA
    • Mounting hardware may be imported


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 2,000 lbs
    • Maximum tongue weight: 200 lbs
    • Not rated for use with weight-distribution systems
  • Limited lifetime warranty


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



13480 Curt Class 3 Trailer Hitch Receiver

Installation Details C77ER Installation instructions

This Product Fits The Following Vehicles




Customer Satisfaction Score:


Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - C77ER

Average Customer Rating:  5.0 out of 5 stars   (23 Customer Reviews)

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.

by:

Perfect for my Mach E !



by:
2022 Ford Mustang Mach-E

The hitch fit perfectly and was very easy to install. My son and I were able to install it in about an hour and a half.

Luther

11/18/2023

I have used it numerous times and it works great. I havent had any issues with it.



by:
Wave

Installation required cutting a slot in the lower (non-visible) part of the plastic bumper. ETrailer’s instruction and template worked perfectly and fit the first time. Also, there was some question as to whether or not the foot wave method of opening the rear hatch would still work, but I have had no problems with that.



by:

Great product, not the easiest to install on the new Mach-E, but good directions.



by:
2021 Ford Mustang Mach-E

The package arrived on schedule. Installation of the hitch is straightforward for an experienced mechanic. I like the result. Fits like a glove.



by:
Ford Mustang

Overall it's a well-made, quality hitch. My mechanic said it was a straightforward installation to my Mustang Mach-E, which was good, since I was only billed for an hour of his time!

Although it was installed for my bike rack, I've not yet attached my Küat rack to carry our bikes just yet.

I've not rated it 5 stars, since it now obscures the under-bumper sensor that requires a simple 'kick' under the bumper to auto-open the rear hatch.

I am hoping to find a workaround for this, as it's a nice feature to have when my hands are full and I need to open the hatch.

Etrailer Expert

Brooke M.

7/1/2022

I reached out to the manufacturer about this and they said that the hitch should not impede the hands free feature. They said you may need to kick a little further under than you normally would without the hitch installed.



by:
2021 Ford Mustang Mach-E

Nice fit and finish, fit well on my new ford mach-e. Easy to install



by:

Was easy to install and instructions were clear enough. Final fit was good and looks clean. sticks out far enough to raise the bike rack into the stowed position and still lift the hatch back.
Well done!



by:

Amazing simple buying process and quick shipping. Super easy to install, and works just as planned to carry bikes!



by:
2021 Ford Mustang Mach-E

There were 14+ 10mm bolts that need to be removed. Installation was pretty simple even for a person who's never installed a hitch. Curt has a video explaining fishwiring bolt process. That's the only part that stumped me.



by:

The hitch fit perfectly exactly as you said it would. There was no problem installing at all. I will definitely recommend you to anyone who needs a hitch, etc



by:

This was easier to install than I thought. Fishing the line with the bolt and metal piece was easy. I then lifted the hitch, tightened and torque. One important note, the bolt is 11/16 not 7/16 as indicated in the directions.



by:

Very Fast. Now I need to install it.

Tracy

8/1/2022

Great



by:
2021 Ford Mustang Mach-E

Clear instructions and precise fit!



by:



by:
2021 Ford Mustang Mach-E

Received product within 72 hours of ord er!!



by:



by:
2021 Ford Mustang Mach-E

Super fast delivery within 2 days



by:



by:
2021 Ford Mustang Mach-E



by:



by:



by:
2021 Ford Mustang Mach-E


23
23

See what our Experts say about this CURT Trailer Hitch

  • Recommended Trailer Hitch for a 2023 Ford Mustang Mach-E
    Yes, we do have a trailer hitch for your 2023 Ford Mustang Mach-E. Check out the: -Curt Trailer Hitch Receiver # C77ER. This trailer hitch has a maximum towing capacity of 2,000-lbs, a maximum tongue weight capacity of 200-lbs, and is custom fit to your vehicle.
    view full answer...
  • Recommended Trailer Hitch Receiver For 2023 Ford Mustang Mach-E
    For your 2023 Ford Mustang Mach-E I recommend going with the Curt # C77ER which will fit your vehicle perfectly, and once installed will just leave the receiver portion itself visible so it will blend in nicely which you can see in the included picture. If you don't already have a bike rack I recommend checking out the Hollywood Racks SportRider # HR1450Z which will work with two bikes weighing up to 50lbs each. I really like how easy it is to get a bike installed on a platform rack like...
    view full answer...
    Image 1 for
  • Trailer Hitch For A 2022 Ford Mustang Mach-E
    We have the perfect trailer hitch that is confirmed to fit your 2022 Ford Mustang Mach-E! The Curt Trailer Hitch Receiver # C77ER has a bolt-on installation with no welding required. It has a gloss black powder coated finish that is over a protective base coat that offers superior rust resistance. The trailer hitch has a maximum gross trailer weight up to 2,000 pounds and has a maximum tongue weight up to 200 pounds. I would recommend checking your vehicle's manual to find the proper...
    view full answer...
  • Draw-Tite Hidden Hitch or Curt Hitch? Which is Better for a 2022 Mustang Mach-E?
    I would be happy to help you find a hitch for your 2022 Ford Mustang Mach-E. I absolutely recommend the Hidden Hitch by Draw-Tite Trailer Hitch Receiver item # DT72GR over the Curt item # C77ER. It is definitely worth the extra money. The receiver is completely removable. When you are not towing your trailer or hauling an accessory you can take the 2" x 2" off and retain your factory appearance. This hitch also has a higher capacity than the Curt and will allow you to fully use your Mach-E's...
    view full answer...
  • Vehicle Wiring Harness For 2021 Ford Mustang Mach-E
    I have a vehicle wiring harness recommendation for you, but the Curt Trailer Hitch Receiver # C77ER you were looking at for your 2021 Ford Mustang Mach-E does not include a wiring harness and trailer hitch receivers do not include the wiring. All you need for wiring is part # C59236.
    view full answer...
    Image 1 for
  • Draw-Tite or Curt Trailer Hitch For 2021 Ford Mustang Mach-E
    That's a good question, and there is one option I do like better for your 2021 Ford Mustang Mach-E between the Curt # C77ER and Draw-Tite # DT72GR hitches, and that's the hitch from Curt, which is the following part number: - Curt Trailer Hitch Receiver # C77ER The reason I like the Curt the best is because it has a longer receiver that allows you to easily install an accessory like a bike rack without any bumper interference; the receiver on the Curt extends just past the bumper so it...
    view full answer...
  • How Far From Bumper of a 2021 Ford Mustang Mach-E Will a Curt Trailer Hitch Receiver C77ER protrude
    The Curt Trailer Hitch Receiver # C77ER does protrude from the bumper. I spoke to a contact at Curt and he did not have the length the receiver came out from the bumper. We measured the hitch and from the first mounting hole to edge of the receiver is 12 1/2". You can use that dimension to measure out that distance from the mounting point under the frame on your Mustang to see exactly where the receiver will sit.
    view full answer...
  • Recommended Hitch To Carry A Bike Rack For A 2021 Ford Mustang Mach-E
    As we haven't had the chance to install either the Curt # C77ER or the Draw-Tite # DT92MR on a 2021 Mustang Mach-E, I went out and measured from the center of the first bolt hole to the end of the receiver opening on both hitches. The Curt will sit out a little further out at 14-1/4", and the Draw-Tite will be 13". With that said, I do agree that the Draw-Tite # DT92MR will be the better option due to it having a higher capacity and sticking out less than the Curt option. However, I do...
    view full answer...
  • Trailer Hitch for Carrying Bike Rack on 2022 Ford Mustang Mach-E
    I'd recommend the US made Curt Class III hitch, part # C77ER. Ford doesn't recommend towing with your vehicle, but using a hitch as an attachment point for a bike rack would work just fine.
    view full answer...
    Image 1 for
  • Recommended Trailer Hitch For Carrying A Bike Rack On A 2022 Ford Mustang Mach-E GT
    I spoke with both Draw-Tite and Curt about a hitch for your 2022 Ford Mustang Mach-E GT and I did come up with an option for you. The Draw-Tite # DT92MR has not yet been confirmed to fit, but the Curt # C77ER has. Though there will be no drilling for the install, you will need to trim an under-body panel for the receiver to come through. I included a picture of what this will need. As this also has a 2" receiver opening, it will have absolutely no problem carrying the Saris SuperClamp...
    view full answer...
    Image 1 for
  • Sensor Interference with Installation of Curt Trailer Hitch Receiver on 2021 Ford Mustang Mach-E
    The Curt Trailer Hitch Receiver # C77ER, is a 2" Custom fit Class III receiver hitch for the 2021 Mustang Mach-E. This currently has a 4.9 rating from customers and there has been no feedback that its installation has caused any issues with OEM sensors.
    view full answer...
  • How Difficult Is It To Install A Hitch On A 2021 Mustang Mach-E
    Installing either the Curt # C77ER or the Draw-Tite # DT92MR on your 2021 Ford Mustang Mach-E does indeed require trimming of the bumper fascia due to the hidden nature of how they install. This can be a bit daunting as it is your brand new vehicle, but fret not for it is not too difficult to accomplish. You can do this a few ways, but slow and steady will make for cleaner and straighter lines. To start, measure twice, mark with painters tape, or something similar, and then verify your...
    view full answer...
    Image 1 for
  • Recommended Trailer Hitch Receiver and 4-Way Wiring For a 2023 Ford Mustang Mach-E
    Yes, I recommend installing the Curt Trailer Hitch Receiver # C77ER on your 2023 Ford Mustang Mach-E. This has a hidden cross tube for a clean, factory appearance. The Wiring Harness # C59496 will give you a 4-way flat connector. This is the common connector found on most small trailers. It will also allow for Auxiliary Lights # C53201 if you are carrying a hitch mounted accessory which impairs the view of your tail lights. The Mounting Bracket # C58001 will allow you to secure the end...
    view full answer...
  • Trailer Hitch and 4-Way Wiring Confirmed to Fit a 2023 Ford Mustang Mach-E
    We have both the trailer hitch and wiring that you are needing for your 2023 Ford Mustang Mach-E. The Curt Trailer Hitch Receiver # C77ER is confirmed to fit and has a bolt-on, no-drill installation. It will also provide you with a 2" hitch receiver, which is the most common size used for hitch mounted accessories such as bike racks, cargo carriers and ball mounts. The Curt Powered Tail Light Converter # C59236 will fit and provide you with a 4-way wiring connector. Adding the etrailer...
    view full answer...
  • Recommended Hitch for a 2023 Ford Mustang Mach-E
    The best hitch for a 2023 Ford Mustang Mach-E is the Curt Trailer Hitch item # C77ER. This hitch is custom fit and bolts to your Mustang with included hardware. It is a class III hitch with a 2" receiver that is great for towing or hauling accessories like cargo carriers and bike racks. I have attached a couple of pictures below so you can see what this hitch looks like once installed. If you are planning on towing you will also need a wiring harness item # C59236 and a ball mount kit...
    view full answer...
    Image 1 for Image 2 for
  • Trailer Hitch Options for a 2023 Ford Mustang Mach-E
    The only trailer hitch options we currently offer for a 2023 Ford Mustang Mach-E are from Curt, the Curt Trailer Hitch Receiver part # C77ER and EcoHitch, the EcoHitch Hidden Trailer Hitch Receiver part # EH66SR. If you'll be towing then you'll want the extra capacity from the EcoHitch but if not then you'll probably just appreciate the cost savings from the Curt so that's what I recommend; Curt for bike racks/cargo carriers and EcoHitch for towing.
    view full answer...
  • Complete Towing Setup For A 2022 Ford Mustang Mach-E
    Yes, for your 2022 Mustang Mach-E, we have the Curt Trailer Hitch Receiver # C77ER. This trailer hitch is a class III hitch that has a maximum 2,000-lbs, a maximum tongue weight of 200-lbs, and has a bolt-on installation with the hardware included. If you're interested in completing your towing setup you're also going to need a set of wiring # C59236 as well as a ball mount # C45030.
    view full answer...
  • Is Fascia Trimming Needed to Install Trailer Hitch on 2023 Ford Mustang Mach-E
    It isn't the actual bumper, but you will need to trim the fascia underneath your 2023 Ford Mustang Mach-E to install the Draw-Tite hitch that fits, which is the following part number: - Draw-Tite Max-Frame Trailer Hitch Receiver # DT92MR. I have added a photo of the instructions showing the cut out size needed to install this hitch so you can get an idea of if that's something you're okay with. There is another option that fits your 2023 Mach-E I wanted to mention that requires cutting...
    view full answer...
    Image 1 for Image 2 for
  • Does Curt Trailer Hitch Receiver Fit 2023 Ford Mustang Mach-E
    It does! I can confirm for you that the Curt trailer hitch is a fit for your 2023 Ford Mustang Mach-E. I verified this directly with the manufacturer for you, and the correct part number is the following: - Curt Trailer Hitch Receiver # C77ER The # C77ER has a 2" receiver, is a bolt-on installation so you don't have to do any type of drilling into your Mustang Mach-E's frame, and has a hidden crosstube so the only part showing is the receiver, which is great because it allows your Mustang...
    view full answer...
  • Trailer Hitch For 2021 Mustang Mach-E With Longest Receiver For Bike Rack
    The hitch for your 2021 Ford Mustang Mach-E with the longest receiver is on the Curt: - Curt Trailer Hitch Receiver # C77ER I have added some photos below that show the Curt hitch installed on a 2021 Mustang Mach-E. As you can see, the receiver extends just past the bumper a bit so there won't be any bumper clearance issues whatsoever for use with a bike rack. This is a 2 inch hitch receiver so you will need a rack compatible with that size, such as the Yakima OnRamp # Y36FR if you...
    view full answer...
    Image 1 for Image 2 for
  • Recommended Trailer Hitch Receiver for 2023 Ford Mustang Mach-E
    For your 2023 Ford Mustang Mach-E I recommend the Curt Trailer Hitch Receiver # C77ER. This Class III hitch has a 2" receiver and a max tongue weight of 200 lbs to handle your bikes and bike rack. It features a bolt-on installation and has a concealed cross tube so only the receiver will be visible. It also comes with a limited lifetime warranty.
    view full answer...
  • Recommended Trailer Hitch Receiver For a 2023 Ford Mustang Mach-E
    I recommend the Curt Trailer Hitch Receiver # C77ER for your 2023 Ford Mustang Mach-E. This receiver is made in the USA and comes with a lifetime warranty against manufacturer defects. It uses a 2" receiver opening which will fit a larger selection of ball mounts and hitch mounted accessories. The Vehicle Wiring Harness # C59236 will provide you a 4-way flat if you plan on towing a small trailer. This will also allow you to use Auxiliary Lights # C53201 with any hitch mounted accessory...
    view full answer...
  • Hitch for 2021 Ford Mustang Mach-E that Allows Hands Free Liftgate to Work Best
    The hitch that would limit access to the hands free liftgate option of your 2021 Ford Mustang Mach-E the least would be the Curt part # C77ER as there is a bit less material around the hitch tube compared to the Draw Tite # DT92MR. With either option the function will still be there but you'd just have to kick more to the side of the hitch tube instead.
    view full answer...
    Image 1 for
  • 1-1/4 Inch Hitch Option for 2021 Ford Mustang Mach-E
    Currently, our manufacturers don't have any plans on releasing a 1-1/4 inch receiver hitch for the Mustang Mach-E, but if there's sufficient demand, that can always change. At this time, the Curt Class III hitch, part # C77ER is the only hitch we offer for the Mach-E. The 2 inch to 1-1/4 inch reducer that provides the least extension would be part # HT02. Because this is a reducer, not an extender the tongue weight capacity of the hitch will not be reduced when the reducer is used. I've...
    view full answer...


< Previous
12



Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Lindsey S
Written by:
Lindsey S
Employee Dustin K
Video Edited:
Dustin K
Employee Wilson B
Updated by:
Wilson B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.