Were Cams of Reese Dual Cam III Upgraded from Previous Version

Question

Question:

Is the cam component of this new hitch better than the old style cam unit? I have a 20 year old dual cam that is due for replacement for peace of mind and to assure nothing breaks. Thank you for your insight.

asked by: Bob W

0

Expert Reply:

Yes, the cam of the Reese Dual Cam III part # RP65FR has been upgraded from models that were made 20 years ago. The brackets have also been upgraded and made to be a lot easier to install as well.

expert reply by: Jameson C

0

Answer 1

Yes, the Reese Dual Cam II Weight Distribution System #RP65FR is a great option for your 2023 Grand Design Imagine XLS 22RBE. To attach it to your 2019 Ford F-250 you will need a Shank #RP69FR and Reducer Sleeve #C45408 to go from the 3"…

view full answer...

Answer 2

One of the great features of the Reese Strait-Line Weight Distribution hitch #RP66073 is that when you go into a turn, the cams unlock and slide to allow a controlled, full-radius maneuver. This system also allows you to back up freely without…

view full answer...

Answer 3

Yes, weight distribution shanks are standardized/universal so you can use one from an old system on the Strait-Line Weight Distribution Systems like part #RP66073.

view full answer...

Answer 4

You are definitely on the right track here. When it comes to weight distribution hitches, it all comes down to your tongue weight. All of these systems will have a range of tongue weights that you want to stay within for them to work effectively. I…

view full answer...

Answer 5

The overall length of the Replacement Trunnion Spring Bar part #RP22225 from the end of the trunnion to the end of the bar is 33". I have attached a photo with this measurement for you as well. This spring bar is a direct replacement for Reese…

view full answer...

Answer 6

Weight Distribution is a good idea whenever the loaded weight of the trailer weighs more that 50 percent of the tow vehicles weight. In addition to eliminating the squat experienced when a trailer is connected, a weight distribution system has other…

view full answer...

Answer 7

The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached…

view full answer...

Answer 8

For a weight distribution shank that has 2 more inches of drop than the part #RP54970 you'd want the part #RP63971.

view full answer...

Answer 9

Thanks for reaching out and providing photos! The head of your Reese Weight Distribution System part 113913 is designed to fit a shank with flush sides where the bolts secure like what we see with part part #RP54970, but the Replacement Hitch Ball…

view full answer...

Answer 10

We don't carry TuffTow W/D kits, but a quick measurement of the width of the upright on your existing shank and the adjustment hole spacing will confirm if the Curt shank will work for you. As long as your current weight distribution hitch head…

view full answer...

Answer 11

Based on the pictures you attached (thank you!) it looks like you have the Equal-i-zer Weight Distribution Shank #EQ90-02-4100 that allows for a drop of up to 3 inches from the top of the hitch receiver opening. The adjustment portion of the shank…

view full answer...

Answer 12

Hey Steve, for your tongue weight of 600 lbs the Blue Ox SwayPro part #BXW0756 is rated correctly and would be a solid option for weight distribution. With that said for the money I would go with the Strait Line part #RP66083 instead as it has a much…

view full answer...