Recommended 2-1/2 Inch Equalizer Weight Distribution Shank with More Drop
Question:
Hi - I have a 20 ft camper with 5300lbs max weight fully loaded, that we had been towing with our Ram 1500 2receiver. Weve recently bought a Ram 2500 2.5inch receiver, and found that the 2500 receiver is a little higher than the 1500. Even after lowering the hitch/equalizer on the shank to the lowest position, it was still a little high. Ive attached a pic of the shank we have from the 1500 setup that were now using on the 2500 - it has about a 9+inch rise/drop section. I think another inch or two of is all we need to fix the issue, and think the 4900, at 11.5inch rise/drop, would be all wed need. Also, because the 2500 has a 2.5inch receiver, it would also keep us from having use the 2inch to 2.5inch adapter that we have been using for the existing 2inch shank. Just looking to confirm if this sounds like Im going in the right direction. Let me know of any questions , or if more details are needed. Thanks!
asked by: David L
Helpful Expert Reply:
Based on the pictures you attached (thank you!) it looks like you have the Equal-i-zer Weight Distribution Shank # EQ90-02-4100 that allows for a drop of up to 3 inches from the top of the hitch receiver opening. The adjustment portion of the shank has an overall height of 9-1/2 inches, which matches up to what you currently have.
The 2-1/2 Inch Equalizer Shank # EQ90-02-4900 that you referenced allows for a greater drop of up to 6 inches. It features a height of 11-1/2 inches on the adjustment side of the shank like you mentioned. This will give you up to 3 more inches of additional drop when compared to your current shank so it will work perfectly. It features 1-1/4 inches of incremental adjustment between the holes.
I also agree that eliminating the need for the reducer sleeve is a good idea, as this will create a more secure connection at the hitch on your new Ram 2500.
Products Referenced in This Question
Equal-i-zer Weight Dist Shank - 12" Long - 7" Rise, 3" Drop - 600 to 1,400 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1400 lbs TW
- Fits 2 Inch Hitch
- Equal-i-zer
- Square - 3 Inch Drop
- Square - 7 Inch Rise
- Equal-i-zer
more information >
Product Page this Question was Asked From
Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 10" Rise/6" Drop
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1200 lbs TW
- 12000 lbs GTW
- Fits 2-1/2 Inch Hitch
- Equal-i-zer
- Square - 6 Inch Drop
- Square - 10 Inch Rise
- Equal-i-zer
more information >
Continue Researching
- Shop: Equal-i-zer Weight Dist Shank - 12" Long - 7" Rise, 3" Drop - 600 to 1,400 lbs TW
- Shop: Reese Dual Cam II Weight Distribution System w/ Active Sway Control - No Shank - 8K GTW - 800 TW
- Video: Reese Dual Cam II Weight Distribution System Review
- Shop: Reese Weight Distribution Shank for 2" Hitches - 9 Hole Adjustment - 1,200 lb TW
- Video: Reese Weight Distribution Shank Review
- Shop: Curt Welded Weight Distribution Shank 7" - 10 Hole Adjustment
- Q&A: Correct Weight Distribution Hitch For My 2002 Dutchman bunkhouse 26 BH26
- Article: Overview of Lubricating Grease
- Shop: Equal-i-zer Weight Dist Shank - 12" Long - 8" Rise, 4" Drop - 600 to 1,400 lbs TW
- Shop: Curt Weight Distribution Shank for 2-1/2" Hitches - 6-3/4" Rise - 3-1/4" Drop
- Shop: Fastway e2 Weight Distribution Shank - 12" Long - 6-1/2" Rise, 4" Drop - 1,200 lbs TW
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Video: Reese Strait-Line Weight Distribution System Installation - on a 2017 Chevrolet Silverado 2500
- Video: Review of Reese 8K GTW - 800 TW Dual Cam II Weight Distribution System - RP65FR
- Video: B&W Continuum Weight Distribution System Review
- Video: Reese Dual Cam High-Performance Sway Control Review and Installation
- Video: Reese Weight Distribution RP54970 Review
- Q&A: Weight Distribution for 6000 Pound Trailer Towed By 2007 Chevrolet Silverado
- Q&A: Overall Length of the Replacement Trunnion Spring Bar Part # RP22225
- Q&A: Were Cams of Reese Dual Cam III Upgraded from Previous Version
- Q&A: Shank Recommendation with 2 More Inches of Drop Than RP54970
- Q&A: How to Pick Out a Weight Distribution System for a 33BHTS Jayco
- Q&A: Correct Shank for Pro Series Tri-Hitch Ball Platform
- Search Results: receiver pin
- Search Results: hitch shank
- Shop: Trailer Hitch
- Search Results: equalizer weight distribution hitch
- Search Results: equalizer
- Search Results: adjustable shank
- Search Results: weight distribution hitch shank
on Accessories and Parts
