Overall Length of the Replacement Trunnion Spring Bar Part # RP22225
Question:
Howdy- I’m looking at replacing my trunnion bars with RP22225. With space being tight, I need to know the lengths. Appreciate the reply
asked by: Dave
Expert Reply:
The overall length of the Replacement Trunnion Spring Bar part # RP22225 from the end of the trunnion to the end of the bar is 33". I have attached a photo with this measurement for you as well. This spring bar is a direct replacement for Reese Weight Distribution Systems such as the Strait-Line Weight Distribution with Sway Control part # RP66073. It has a 400-800 lb tongue weight rating.
Products Referenced in This Question
Strait-Line Weight Distribution w/ Sway Control - No Shank - Trunnion Bar - 8K GTW, 800 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Shank Not Included
- Electric Brake Compatible
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- Allows Backing Up
- 500 lbs
- 600 lbs
- 700 lbs
- Reese
more information >
Product Page this Question was Asked From
Replacement Trunnion Spring Bar for Reese Weight Distribution System - 800 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Spring Bars
- 800 lbs TW
- Trunnion Bar
- Reese
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Reese Dual Cam II Weight Distribution System w/ Active Sway Control - No Shank - 8K GTW - 800 TW
- Video: Reese Dual Cam II Weight Distribution System Review
- Shop: Pro Series Weight Distribution Shank - 12" - 12,000 lbs
- Shop: Equal-i-zer Weight Dist Shank - 12" Long - 7" Rise, 3" Drop - 600 to 1,400 lbs TW
- Q&A: Correct Weight Distribution Hitch For My 2002 Dutchman bunkhouse 26 BH26
- Shop: Pro Series Weight Distribution Shank - 14" Long - 4-3/4" or 6-1/2" Drop - 1.5K TW
- Shop: 2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs
- Shop: Curt Weight Distribution Shank for 2-1/2" Hitches - 6-3/4" Rise - 3-1/4" Drop
- Shop: Curt Adjustable Weight Distribution Shank - 8"
- Article: Overview of Lubricating Grease
- Video: Review of Reese Weight Distribution - WD With Sway Control - RP66073
- Video: Master Lock Hitch Pins and Clips - Standard Hitch Pin - ML1465DAT Review
- Search Results: receiver pin
- Video: Reese Strait-Line Weight Distribution System Installation - on a 2017 Chevrolet Silverado 2500
- Video: Reese Dual Cam High-Performance Sway Control Review and Installation
- Video: Reese Weight Distribution RP54970 Review
- Video: B&W Continuum Weight Distribution System Review
- Q&A: Weight Distribution for 6000 Pound Trailer Towed By 2007 Chevrolet Silverado
- Q&A: Were Cams of Reese Dual Cam III Upgraded from Previous Version
- Q&A: Shank Recommendation with 2 More Inches of Drop Than RP54970
- Q&A: How to Pick Out a Weight Distribution System for a 33BHTS Jayco
- Q&A: Correct Shank for Pro Series Tri-Hitch Ball Platform
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Shop: BOLT brand vehicle and hitch locks
- Shop: Suspension Enhancement
- Q&A: Compatibility of Curt C17131 Shank with Tuff Tow Weight Distribution
- Search Results: locking hitch pin
- Search Results: sway control only
- Search Results: friction sway control
- Search Results: camco leveling blocks