Trailer Hitch Receiver Confirmed to Fit a 2013 BMW 528i

Question

Question:

Does this trailer hitch fit the 528i 2013 model ?

asked by: Daniel

0

Expert Reply:

For your 2013 BMW 528i you will need the Stealth Hitches Hidden Rack Receiver # SH97ZR. The Curt # C11381 will only fit the 535 and 550 trim levels in either 2wd or xDrive. We do have the Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit # SH38ZR if you plan to do any trailer towing or will need the wiring for Auxiliary Lights # C53201 for any hitch mounted accessories.

Be sure to get the Carrying Case # 391CASEC to store the receiver and ball mount when not in use.

expert reply by: Bud M

0

Answer 1

According to Stealth Hitches, both the #SH97ZR and #SH38ZR will fit your 2014 BMW 528i Sedan. The difference between these is that the #SH97ZR is just the hitch, while the #SH38ZR includes their towing kit. The reason the hitch appears to be…

view full answer...

Answer 2

The Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit #SH38ZR will fit your 2014 BMW 535D. This kit includes the 2" receiver for your hitch mounted accessories and a 2" hitch ball mount for trailer towing and the wiring. I…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 7

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

There is a trailer hitch receiver as well as a 4-way wiring harness that fit your 2022 Jeep Grand Cherokee WL; that said, we don't have any way to reference a VIN so you'll need to confirm if you do have the WL, which is the new model of…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

The brake controller port on a 2021 Ford F-150 (if equipped) will be located behind the coin tray in the center console. This will be accessed by removing the panel under the steering wheel. I have attached a video which shows this below. For a brake…

view full answer...