Recommended Roof Rack for a 2023 Jeep Renegade w/ Side Rails

Question

Question:

I have a 2023 Jeep Renegade. It has the side rails running along the roof. I would like to add a set of crossbars to mount my ski board holder. Is there a set that will work for my Renegade?

asked by: Kevin B

0

Expert Reply:

Yes, there is a set of crossbars that will fit the factory side rails of your 2023 Jeep Renegade. This set mounts directly to the side rails and is compatible with almost all ski racks. You will want the roof rack by Rhino Rack and it includes the following parts:

Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 49" Long - Qty 2 item # RRVA126B-2

Rhino-Rack SX Series Legs for Vortex Aero Crossbars - Raised Factory Side Rails - Qty 4 item # RRSX100

This aero bar roof rack system has a 176 lbs capacity. The included locks will prevent theft. The rubberized vortex strips in the top channels dramatically reduce drag and wind noise.

I have linked a couple of pictures, along with a video, that will show you what this system will look like when installed on your Jeep.

expert reply by: Jerred H

0

Jeep Renegade Rhino Rack Front
(click to enlarge)

Jeep Renegade Rhino Rack Side
(click to enlarge)

Jeep Renegade Rhino Rack top
(click to enlarge)

Answer 1

Yes, you can transfer your 42102BF Rhino-Rack Platform Rack to raised side rails by using the RR43246 Rhino-Rack Pioneer VA Conversion Kit, along with the Rhino-Rack SX Series Legs #RRSX100. I have added a link below to a video review of these legs…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 4

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 5

By "mobile home type bolt pattern" I believe you are talking about a 5 spoke utility bolt pattern such as what is on the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles #8-174-5UC3. To measure your axle from hub face to…

view full answer...

Answer 6

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 7

Hey Luke, Sorry about the confusion, and we can 100% get your 2007 Honda Civic 4-door sedan set up with all the parts needed for a Rhino-Rack roof rack, including both crossbars. You would just need these parts: - Rhino-Rack Vortex Aero Crossbars…

view full answer...

Answer 8

First of all, thanks for the picture of your cute doggy! Yes, you can use a Thule Hullavator Pro item #TH898 or Yakima ShowDown item #Y04081. I can't tell from your picture but there were versions of the A.R.E. camper shells that had tracks on…

view full answer...

Answer 9

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 10

Hey John, I used to have a 2013 Sienna, it was a great van. I can definitely help set you up with Rhino Rack Vortex Aero Crossbars for your 2014 Sienna. The Rhino-Rack #RRVA126B-2 that you mentioned is a set of crossbars only though, so additional…

view full answer...

Answer 11

Yes, the Bolt Trailer Hitch Lock part #BL7023582 will work for you as it is a hitch lock designed for 2-1/2 inch hitches like what you have on your GMC 3500 truck. The usable portion of this lock is 3.55 inches. Check out the picture I attached for…

view full answer...

Answer 12

The Dexter 10K electric brakes #23-439 (right side) and #23-438 (left side) will have to be manually adjusted using the adjustment wheel below the magnet. To adjust the brakes you will use a small screwdriver or similar tool to turn the adjustment…

view full answer...