Torque Specs For etrailer Trailer Hitch Receiver # e53AR on a 1999 Dodge Dakota

Question

Question:

what is the torque for bolts on hitch for 1999 dodge dakota 4x4

asked by: James

0

Expert Reply:

I have linked the installation instructions below for the etrailer Trailer Hitch Receiver # e53AR which fits your 1999 Dodge Dakota. This contains all the torque specs for the different fasteners in step 5. We do have the Digital Torque Adapter # PTM206 you can use with your 1/2" socket wrench to ensure you get the correct torque.

expert reply by: Bud M

0

Answer 1

The Digital Torque Adapter #PTM206 should not be used with an impact wrench. It is meant to be used on a torque wrench with a 1/2" drive to convert it to a digital torque wrench for ease of use. I have added a link below to a video review for…

view full answer...

Answer 2

Depedning on what your trailer has we may have what you need. If your trailer has an underslung 2-5/16" ball coupler #AMP56FR is a great option. -If you have a flat lip 2" ball coupler, then the AMPLock Coupler Lock for Flat Lip 2"…

view full answer...

Answer 3

Thank you for the pictures! This helps a great deal when making sure parts are compatible. The AMPLock Coupler Lock for Flat Lip 2" Ball Couplers - Ductile Cast Iron #AMP89FR you were looking at is a great choice for your 2" coupler and…

view full answer...

Answer 4

The Digital Torque Adapter part #PTM206 has a value readout of 30 to 150 ft-lbs or 360 to 1,800 in-lbs. The Powerbuilt Digital Torque Adapter part #ALL940963 can go as low as 20 ft-lbs or 240 in-lbs if needed.

view full answer...

Answer 5

Electric drum brakes such as #AKEBRK-35L-SA will use nut/lock washer hardware kit #BRKH10BS and the nuts should be tightened to 45 to 50-ft-lbs. If you need a torque wrench we offer several such as #ALL644044 as well as Torque Adapter #PTM206 which…

view full answer...

Answer 6

From the numbers you provided it sounds like you need replacement grease seals. In my research, the grease seals I found with the GS-1719DL number have a 1.72 inside diameter and 2.565 outside diameter. The replacement double lip grease seals you…

view full answer...

Answer 7

A Moly EP grease like part #LM54FR would work well for greasing the suspension components of your trailer. For a grease gun to use the wet bolts and get grease into the #trbu11566 with the wet bolts you would want the #L30200. As long as the wet bolt…

view full answer...

Answer 8

Yes, I would recommend keeping the bolts of the #AP233 lubricated. An easy way to do this is to use wet bolts like part #126B2 which have a zerk fitting that allows for easy application of grease to them.

view full answer...

Answer 9

When you use the Bearing Buddy Bearing Protectors like #BB2441, so you do not need to take apart the wheel hub and repack the bearings. The Bearing Buddy Protectors have a spring loaded seal that keeps the moisture and debris out of the bearings.…

view full answer...

Answer 10

I am not entirely sure what process you took so I'll give you some other things to try, or maybe a different way to test the Prodigy P3 #90195. First, sever the blue wire a couple inches from the back of your controller. Then use a circuit tester…

view full answer...

Answer 11

On each individual electric brake magnet the amperage draw would be 3.0 to 3.2 max amps at 12 to 13 volts on 7-inch brake magnets and 3.2 to 4.0 max amps at 12 to 13 volts on 10 and 12-inch brake magnets. The max amperage draw for the brake magnets…

view full answer...

Answer 12

Starting with the brakes if the pads on the shoes are cracked or if the wear indicators are showing then they should be replaced. If there are no wear indicators and you notice weak braking with the brakes adjusted out then they would need to be…

view full answer...

Torque Specs For etrailer Trailer Hitch Receiver # e53AR on a 1999 Dodge Dakota

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching