Can Digital Torque Adapter PTM206 be Used With an Impact Wrench

Question

Question:

Can it be used with an impact wrench?

asked by: James A

0

Expert Reply:

The Digital Torque Adapter # PTM206 should not be used with an impact wrench. It is meant to be used on a torque wrench with a 1/2" drive to convert it to a digital torque wrench for ease of use.

I have added a link below to a video review for you to check out as well of the Digital Torque Adapter # PTM206.

expert reply by: Kyle S

0

Answer 1

Not only can the 5.30-12 bias trailer tires on your Jayco camper be replaced by ST145/R12 radial tires, it's something I highly recommend. Reason for that is bias tires have cords which run diagonally while radial tires have cords that run…

view full answer...

Answer 2

Electric drum brakes such as #AKEBRK-35L-SA will use nut/lock washer hardware kit #BRKH10BS and the nuts should be tightened to 45 to 50-ft-lbs. If you need a torque wrench we offer several such as #ALL644044 as well as Torque Adapter #PTM206 which…

view full answer...

Answer 3

We don't have any replacement parts available for the Gorilla Guard Coupler locks. You would need to replace the entire coupler lock with #63228 to get the new barrel and key. I've attached a video of this product for you.

view full answer...

Answer 4

The Digital Torque Adapter part #PTM206 has a value readout of 30 to 150 ft-lbs or 360 to 1,800 in-lbs. The Powerbuilt Digital Torque Adapter part #ALL940963 can go as low as 20 ft-lbs or 240 in-lbs if needed.

view full answer...

Answer 5

Depedning on what your trailer has we may have what you need. If your trailer has an underslung 2-5/16" ball coupler #AMP56FR is a great option. -If you have a flat lip 2" ball coupler, then the AMPLock Coupler Lock for Flat Lip…

view full answer...

Answer 6

Thank you for the pictures! This helps a great deal when making sure parts are compatible. The AMPLock Coupler Lock for Flat Lip 2" Ball Couplers - Ductile Cast Iron #AMP89FR you were looking at is a great choice for your 2" coupler…

view full answer...

Answer 7

I have linked the installation instructions below for the etrailer Trailer Hitch Receiver #e53AR which fits your 1999 Dodge Dakota. This contains all the torque specs for the different fasteners in step 5. We do have the Digital Torque Adapter…

view full answer...

Answer 8

The speed rating should be on the sidewall of your tires unless it is the standard 65 mph max. The letter represents the following maximum: J=63 mph L=75 mph M=81 mph N=87 mph For your tires, I recommend the Taskmaster 5.30R12 Radial Trailer Tire -…

view full answer...

Answer 9

To select new trailer tires/wheels for your Jayco pop-up camper you'll want to confirm the trailer's axle rating so you can select wheels and tires that have the necessary weight capacity. Usually there will be a sticker or plate on the axle…

view full answer...

Answer 10

The Karrier ST205/75R14 Radial Trailer Tire #AM10235 would be an excellent radial tire for your camper. We also have the Loadstar ST205/75D14 Bias Trailer Tire #AM1ST86 which, like your original tires, is a diagonal bias tire. The bias ply tire has a…

view full answer...

Answer 11

We can help you select new 5.30-12 tires or this size tire pre-mounted on a 4-lug wheel if you prefer. All the 5.30-12 tires we offer are bias ply types; no radial tires are offered in this size. I suggest you use a Load Range D tire, part #AM10068…

view full answer...

Answer 12

I highly recommend the Taskmaster 5.30R12 Radial Trailer Tire #TT53012C for your trailer. This is an excellent, radial ply trailer tire that features a maximum load of 1,050 pounds at 80 psi along with a maximum speed of 81 mph. You will just need to…

view full answer...

Can Digital Torque Adapter PTM206 be Used With an Impact Wrench

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching