Recommended Trailer Coupler Lock for 2 Inch Coupler

Question

Question:

I an looking for a good quality Trailer Coupler Lock for 2inch Lipped Couplers. The coupler width including lip is 3 7/8 inches.

asked by: Dave

1

Helpful Expert Reply:

Thank you for the pictures! This helps a great deal when making sure parts are compatible. The AMPLock Coupler Lock for Flat Lip 2" Ball Couplers - Ductile Cast Iron # AMP89FR you were looking at is a great choice for your 2" coupler and will give you superior security for your trailer.

I've linked a review video of this lock for you to check out, as well

expert reply by: Erik B

1

coupler
(click to enlarge)

Answer 1

For your 2018 Acura MDX the aftermarket trailer hitch that will be most similar to the OEM/factory unit is the etrailer.com Class III Hitch #e98840. The primary difference between the OEM hitch for the Acura MDX and an aftermarket model is their…

view full answer...

Answer 2

As long as the spare tire uses an 18" or smaller wheel, it will still fit after the etrailer Trailer Hitch Receiver #e98840 you were looking at is installed on your 2017 Acura MDX. If you have a spare tire with larger than an 18" wheel you…

view full answer...

Answer 3

The Digital Torque Adapter part #PTM206 has a value readout of 30 to 150 ft-lbs or 360 to 1,800 in-lbs. The Powerbuilt Digital Torque Adapter part #ALL940963 can go as low as 20 ft-lbs or 240 in-lbs if needed.

view full answer...

Answer 4

Electric drum brakes such as #AKEBRK-35L-SA will use nut/lock washer hardware kit #BRKH10BS and the nuts should be tightened to 45 to 50-ft-lbs. If you need a torque wrench we offer several such as #ALL644044 as well as Torque Adapter #PTM206 which…

view full answer...

Answer 5

Depedning on what your trailer has we may have what you need. If your trailer has an underslung 2-5/16" ball coupler #AMP56FR is a great option. -If you have a flat lip 2" ball coupler, then the AMPLock Coupler Lock for Flat Lip 2"…

view full answer...

Answer 6

I have linked the installation instructions below for the etrailer Trailer Hitch Receiver #e53AR which fits your 1999 Dodge Dakota. This contains all the torque specs for the different fasteners in step 5. We do have the Digital Torque Adapter…

view full answer...

Answer 7

The Digital Torque Adapter #PTM206 should not be used with an impact wrench. It is meant to be used on a torque wrench with a 1/2" drive to convert it to a digital torque wrench for ease of use. I have added a link below to a video review for…

view full answer...

Answer 8

From the numbers you provided it sounds like you need replacement grease seals. In my research, the grease seals I found with the GS-1719DL number have a 1.72 inside diameter and 2.565 outside diameter. The replacement double lip grease seals you…

view full answer...

Answer 9

Yes, I would recommend keeping the bolts of the #AP233 lubricated. An easy way to do this is to use wet bolts like part #126B2 which have a zerk fitting that allows for easy application of grease to them.

view full answer...

Answer 10

A Moly EP grease like part #LM54FR would work well for greasing the suspension components of your trailer. For a grease gun to use the wet bolts and get grease into the #trbu11566 with the wet bolts you would want the #L30200. As long as the wet bolt…

view full answer...

Answer 11

When you use the Bearing Buddy Bearing Protectors like #BB2441, so you do not need to take apart the wheel hub and repack the bearings. The Bearing Buddy Protectors have a spring loaded seal that keeps the moisture and debris out of the bearings.…

view full answer...

Answer 12

On each individual electric brake magnet the amperage draw would be 3.0 to 3.2 max amps at 12 to 13 volts on 7-inch brake magnets and 3.2 to 4.0 max amps at 12 to 13 volts on 10 and 12-inch brake magnets. The max amperage draw for the brake magnets…

view full answer...

Recommended Trailer Coupler Lock for 2 Inch Coupler

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching