Replacement Shroud for Coleman Mach 3 on 1977 GMC Motorhome

Question

Question:

Hi, Im in search of a replacement shroud for a Coleman Mach 3 air conditioner. Im trying to match the pointy shape of the original cover. Why, you ask? This is on a 77 GMC front drive motorhome. The stock shroud matched the pointy shape of the motorhome. All the replacement shrouds Ive seen so far just wouldnt look right, at least my OCD says so. Thanks

asked by: Jeff M

0

Expert Reply:

The MaxxAir Replacement RV Air Conditioner Cover # MA8335A5261 will replace your Coleman Mach 3 shroud. Although it may not be as pointy as the original, the contours from the side profile aren't far off from the front of your 1977 GMC motorhome.

expert reply by: Robin H

0

MaxxAir Replacement RV Air Conditioner Cover.
(click to enlarge)

Answer 1

The Replacement Advent Air RV Air Conditioner Cover #PXXMCOVER doesn't look like it will fit your Duo Therm Model 57915.531 on your 2002 Thor Tahoe Lite TT, unfortunately. Right now, we do not offer a replacement shroud for that particular unit,…

view full answer...

Answer 2

From what I could find on your 13,500 BTU Dometic Quick Cool it is a Brisk Air. The Replacement RV Air Conditioner Cover for Penguin and Dometic Air Conditioners #AT3308046006 can be used as a replacement on the Brick Air's. But the #AT3308046006…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

view full answer...

Answer 5

Thanks for the pictures of your roof vent lid Marty! Based on that the correct replacement is the Ventline part #BVD0449-A01 that you referenced if you wanted white or the part #BVD0449-A03 for the same smoke color you have now.

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Hey Frankie, The bracket for the Timbren Suspension Enhancement System #TFR250SDJ has a locknut in it that makes it feel like the bolt (part #4) is fully tightened when it's not. Their techs have stated that you just have to push past this point…

view full answer...

Answer 8

Hey Paul, we have a Blue Ox base plate kit that fits your 2024 Nissan Versa with the part #BX1856. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle.…

view full answer...

Answer 9

To add a in-bed 7-way to your 2024 Chevy Silverado 2500 to make towing with a 5th wheel easier, I recommend adding the Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector - 7' Long item #C58FV. This harness puts a 4-way and 7-way…

view full answer...

Answer 10

Hi Eric; the Curt Push-To-Test Trailer Breakaway Kit with Built-In Battery Charger #C52044 will work for your triple axle Kaufmann trailer. This is designed for 1 to 3 axle trailers with electric brakes so triple axle isn't a problem. As long as…

view full answer...

Answer 11

The MaxxAir Replacement RV Air Conditioner Cover - Coleman-Mach / RVP Brand RV Air Conditioners - White #MA8335A5261 is the correct fit for your 7300 series RVP. The shroud is 37 inches by 25 by 13-1/2 inches. If you don't want the two piece unit…

view full answer...