Recommended Hitch and Wiring Harness for a 2016 Audi SQ5

Question

Question:

I need a Draw-Tite hitch, wiring and brake controller for a 2016 Audi SQ5 . Im not sure the appropriate wiring package, can you help?

asked by: Robert P

0

Expert Reply:

I would be happy to help you. For a Draw-Tite Hitch on your 2016 Audi SQ5 you will want item # 75940. This hitch is custom fit and bolts directly to your Audi's frame with included hardware.

To add a brake controller you will need two separate wiring harnesses because you will need to add a 7-way to plug the trailer into. The first harness you will need is the Curt T-Connector item # C56404. This custom-fit T-connector plugs into your vehicle's wiring harness, which is located in your rear cargo area. It will provide you with a 4-flat connector.

The second harness you will need is the Universal Installation Kit for Trailer Brake Controller item # ETBC7. The kit includes a pre-wired 7- and 4-way trailer connector that mounts easily at the rear of your vehicle with an included bracket. This kit is designed for use on a vehicle with an existing 4-way flat trailer connector and plugs directly into it.

For a brake controller you will want the Redarc Tow-Pro Liberty Brake Controller item # RED24FR. This is a proportional brake controller with a unique installation method. The main control unit gets hidden behind the dash and the only visible part is the nickel sized control knob that can be mounted wherever convenient.

To connect the Redarc without having to cut or splice wires you will want the Redarc Tow-Pro Wiring Adapter for Tekonsha Brake Controller Harness item # 331-TPH-017 and the Tekonsha item # TK22FR. This will give you a plug and play installation.

If you don't mind cutting and splicing wires you will only need the Universal Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item # RED69FR.

To round out your towing setup I recommend the Curt Towing Starter Kit for 2" Hitches item # C45534. This towing kit will provide you with a 2" ball and a fixed ball mount with a 3/4" rise and 2" drop. It also includes a hitch pin and clip, hitch receiver lock with keys, hitch cover, and a storage case.

If you want an easier all in one solution to your hitch and wiring harness that is not a Draw-Tite, then I recommend the Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit item # 391AUDQ509T. This kit includes the 7-way wiring harness you will need. The receiver is also completely removable when you are not towing. It includes a towing ball mount and a 2" x 2" accessory receiver for bike racks and cargo carriers.

expert reply by: Jerred H

0

Answer 1

You do have the correct part to add the towing kit to your 2015 Audi Q5 to go with the Stealth Hitches rack receiver that fits your vehicle. The receiver and kit are the following: - Stealth Hitches Hidden Rack Receiver #391AUDQ509 - Towing Kit w/…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Your 2019 Volkswagen Atlas has brake controller wiring but it does not currently have a brake controller installed in it. Rarely do vehicles have factory brake controllers and it's basically only trucks that do. Reason being lighter duty vehicles…

view full answer...

Answer 4

It will work with both. The Curt T-Connector Vehicle Wiring Harness item #C56404 sends the signals from your tail lights to the converter box that actually powers your trailer's lights. The direct line from the battery powers both LED and…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...