Recommended Front Hitch for Snow Plow on 2022 Nissan Frontier Pro-4X

Question

Question:

I am looking for a 2 inch FRONT HITCH to fit a 2022 Nissan Frontier Pro4 X. I have a DK snow plow with an electric winch I want to use this winter. Do you have anything?

asked by: Geoff F

0

Expert Reply:

The Draw-Tite Front Mount Trailer Hitch Receiver part # 65075 per Draw-Tite is a fit for a 2022 Nissan Frontier Pro-4X. It's the only available option at this time. This hitch offers a direct bolt-on fit and it will work great for any 2" hitch mounted snowplow.

expert reply by: Conner L

0

Answer 1

The Draw-Tite Front Mount Trailer Hitch Receiver part #65075 is a confirmed fit for a 2022-2023 Nissan Frontier Pro 4X. I check with Draw-Tite for you to confirm. It's the same front hitch as the previous generation so that is where there may be…

view full answer...

Answer 2

Thanks for the picture! Yes, there are modifications required but all you will need to do to install the Draw-Tite item #65075 on your 2022 Nissan Frontier is to remove the air damn or trim about 1/4 of it away. This piece will sit behind the hitch…

view full answer...

Answer 3

I am happy to verify for you that your 2023 Nissan Frontier Pro 4X is 100% compatible with the Draw-Tite front hitch that fits, which is the following part number: - Draw-Tite Front Mount Trailer Hitch Receiver #65075 So you will have no issues…

view full answer...

Answer 4

In order to use a snowplow on the 2022 Nissan Frontier you'll need a front mount trailer hitch, the Draw-Tite Front Mount Trailer Hitch Receiver part #65075 is currently our only option for this. The hitch does require removal of the lower air…

view full answer...

Answer 5

Yes, you can! To add a front hitch to a 2023 Nissan Frontier, I recommend the Draw-Tite item #65075. This front mounted hitch is custom fit and bolts to your Nissan with included hardware. It comes with a 2" receiver that has a 5,000 lbs towing…

view full answer...

Answer 6

There isn't much of a difference between the Draw-Tite Front Mount Trailer Hitch Receiver #DT36MR and the Curt Front Mount Trailer Hitch Receiver #C31089 since they both have the exact same line pull and vertical load capacities. Even though they…

view full answer...

Answer 7

I recommend adding the SumoSprings Solo Custom Helper Springs #SS96EV to your 2022 Nissan Frontier. These will fit all trucks except for the King cab and provides 1,400lbs of support to your factory suspension to reduce sag and provide increased…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

From what I can find on the 2022 Nissan Frontier, the plug for the brake controller that will let you use a harness like the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers #3050-P is located just above the OBD connector, taped tight…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...